Image
Enter your search terms below:
23 results found
Wiring Diagram - Monitoring 24VAC On/Off with an RX3000 Station
Attached is a wiring diagram that shows you how to monitor the on/off state of a 24VAC circuit using the RX3000 station.
Read tech note
Sample Data - HOBO RX3000 - RXMOD-A1 - Judd Snow Depth Data from HOBOlink
Attached is a screenshot from HOBOlink depicting data recorded by a HOBO RX3000 station that was connected to the Judd Snow-Depth Sensor.
Read tech note
How the RXMOD-A1 with HOBO RX3000 Samples Analog Data and Resolution
How many samples are collected when a measurement is taken and how long is the measurement window open?
Read tech note
Wiring Diagram - Monitoring DC Voltage and Current with the RX3000 Station
Attached is a drawing that shows how to monitor DC voltage and/or current using the RX3000 Remote Monitoring Station via the Four Channel Analog Input Module, RXMOD-A1.
Read tech note
Using the Judd Communications Snow Depth Sensor with the HOBO RX3000 Station
Check out the attached PDF to learn how to use the Judd Communications Snow-D
Read tech note
Using the Gill Instruments WindSonic Opt 3 Wind Speed and Direction Sensor with the HOBO® RX3000 Station
This application note describes how to connect and operate the Gill WindSonic sensor (Opt 3 with analog outputs) with the HOBO RX3000 station.
Read tech note
Wiring Diagram - Monitoring Three-phase Energy using the RX3000 Station and a Wattnode kWh Transducer
Attached is a wiring diagram that shows how to connect a Wattnode kWh Transducer to a H
Read tech note
Remote Water Level Monitoring Application (RX3000)
This technical note provides details on configuring the HOBO RX3000 Remote Monitoring Station with water level sensors with a 4-20mA output.
Read tech note