Product Image Viewer
  • TMC6-HC

Stainless Steel Temperature Probe (6' cable) Sensor

Part # TMC6-HC


A food-grade stainless-steel temperature probe with pointed tip for use with HOBO U-Series, UX120-006M, MX1100 external-channel data loggers, or ZW series wireless data nodes.

  • Accuracy and resolution vary according to attached logger model
  • Measurement range is -40° to 100°C (-40° to 212°F) in air or water
  • Response time is 3 minutes typical to 90% in air moving 1m/sec (2.2mph)
  • Response time in stirred water is 15 seconds typical
  • Sensor is attached to a 1.8m (6ft) cable

In what environment does this operate?

This operates in indoor and outdoor environments.

What measurements does this support?

The supports the following measurement: Temperature

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.





Measurement range: -40° to 100°C (-40° to 212°F)
     w/U12: ±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum;
     w/ZW: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum; 
     w/UX120-006M, MX1104 and MX1105: ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F), insert probe 5.08 cm (2 inches) minimum; 
     w/U12: 0.03° at 20°C (0.05° at 68°F); 
     w/ZW: 0.02°C at 25°C (0.04°F at 77°F); 
     w/UX120-006M, MX1104 and MX1105: 0.002° at 25°C (0.003° at 77°F); 
Drift: <0.1°C (<0.2°F) per year
Response time in air: 3 min. typical to 90% in air moving 1 m/sec (2.2 mph)
Response time in stirred water: 15 sec. typical to 90%.
Probe dimensions: 102mm (4 in.) food-grade stainless steel probe with pointed tip; 3.2mm ±0.25mm (0.12 inches ±0.01) diameter
Cable length: 1.8m (6 feet)

Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details contact Onset Computer Corporation or an Onset authorized dealer.

Documentation for the TMC6-HC

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Recently Viewed