Image
Part Number -
T-VER-971BP-200
Split-Core DC Transducer Sensor
$325.00 USD
Measures up to 200 Amps of DC current in both flow directions.
Overview
Measures up to 200 Amps of DC current in both flow directions.
Requirements for use with specific data loggers:
- HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1)
- HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1)
- HOBO RX3000: an analog input module (RXMOD-A1)
- HOBO U30: an analog input module (VIA)
- HOBO H22: an analog input module (S-FS-CVIA)
Features
- Measures current flow in both directions, which is especially beneficial for Solar PV applications.
- Adjustable span range
- Small size, split-core for ease of installation
Specifications
| DC Amperage |
| Measurement range: +/- 2 to +/- 200 (via span adjust) |
| Accuracy (below 100A span): +/- .5 A |
| Accuracy (above 100A span): +/- .5% full scale |
| Sensor supply: 12 - 24 DC (15 VDC min. for currents > 120 A), 35 mA no-load to 110 mA at 200 A current |
| Isolation: 600 VAC rms |
| Operating temperature range: -30 to 60C (-22 to 140F) |
| Humidity range: 10 - 90% non-condensing |
| Response time: 2 sec. |
| Output: (bi-polar) 4 - 20mA |
| Dimensions: 3.1x2.8x1.4 in. (79x70x36 mm) |
| Weight: 5.25 oz. |
| Sensor opening: 1.1x.9 in. (28x23 mm) |
| LED indications: single green blink=Norm, double green=Over Span, red+green=Over Limit, solid red=overload |
| CE, UL |
Compatible items
Bluetooth (BLE) Data Loggers
USB Data Loggers - requires external sensor(s)
Web-based Monitoring Systems - via remote communication
USB Data Loggers - w/external sensor(s)
Sensors
Analog Input Adapter
Recently Viewed
Sensor
Split-Core 200A DC Transducer Sensor
Split-Core 200A DC Transducer sensor that measures up to 200 Amps of DC current.
Sensor
Veris Kilowatt Hour Transducer 3-Phase, 800 Amp Sensor
The Veris AC Kilowatt Transducer incorporates three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a Pulse Input Adapter. Because these sensors tie directly into the line, they should be used only by qualified personnel. NOTE: Not recommended for use with variable frequency drives.