Image
Part Number -
T-VER-8044-100
Veris 480 V, 100 Amp Kilowatt Transducer Sensor
Discontinued
The Veris AC Kilowatt Transducer incorporates three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a FlexSmart Analog Module.The Veris AC Kilowatt Transducer incorporates three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand)
Overview
The Veris AC Kilowatt Transducer incorporates three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a FlexSmart Analog Module. Because these sensors tie directly into the line, they should be used only by qualified personnel. NOTE: Not recommended for use with variable frequency drives.
Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1).
Features
- Split-core installation eliminates the need to remove conductors
- Self-contained 0 to 100 AMP current transducer for 1- or 3-phase power monitoring
- Precision meter electronics
Specifications
Includes: 3 100 Amp Split-Core Current Transformers (CT)
Input primary voltage: 480 Volts AC rms
Accuracy: ±1% per ANSI (C12.1) (from 10 to 100% of CT rating)
Number of phases monitored: 3
Frequency: 50/60 Hz
Internal isolation: 2000 VAC rms
Insulation class: 600 VAC rms
Operating temp range: 0 to 60°C (32° to 140°F)
Operating humidity range: 0 to 95% RH, non-condensing
Output signal to FlexSmart: 4-20mA
Supply powered (current loop): 9-30 VDC, 30mA max
Current transformer: 100 Amp AC
3.8cm x 3.2cm (1.5 in. x 1.25 in.)
Dimensions of each CT: 10.7cm x 12.1cm x 2.9cm (4.2 in. x 4.75 in. x 1.13 in.)
Number of data channels: 1
Compatible items
Bluetooth (BLE) Data Loggers
USB Data Loggers - requires external sensor(s)
Web-based Monitoring Systems - via remote communication
USB Data Loggers - w/external sensor(s)
Sensors
Analog Input Adapter
Power
Recently Viewed
Sensor
0.01" Rain Gauge (2m cable) Smart Sensor
Measures rainfall with intensity up to five inches per hour with a resolution of 0.01 inch, and 1% accuracy for rainfall rates up to 1"/hour. *Requires a data logger.
Sensor
0 - 5 AMP Split-core AC Current Transformer Sensor
The Magnelab AC Current 0-5 Amp AC Current Transformer or CT (Magnelab part # SCT-0750-005) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is accurate current measurement for many types of equipment, including variable frequency drives and switched power sources. One or two CTs can be used with each FlexSmart TRMS Module.
Sensor
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor
For sub-metering, net-metering, energy management, and performance contracting applications, the WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms.
