Image
Part Numbers
LI-200R-BL-2
•LI-200R-BL-5
•LI-200R-BL-15
•LI-200R-BL-50
LI-COR LI-200R Pyranometer, Bare Leads
From $360.00 USD
Measures global solar radiation in watts per square meter (W m-2) for various research applications.
Important Information
This sensor requires a 2420-BL Amplifier and HOBOnet Analog Module for connection to the HOBO RX remote monitoring station. We highly recommend deployment with an optional LI-COR 2003S Mounting and Leveling Fixture.
Overview
The LI-200R Pyranometer is meant to be used outdoors under unobstructed natural daylight conditions. It measures global solar radiation—the combination of direct and diffuse solar radiation—in the 400 to 1100 nm range. Measurement units are in watts per square meter (W m2).
Ideal for agricultural, meteorological, solar energy, and environmental research, the LI-200R is available with a variety of cable lengths and compatibility with most data loggers.
Why choose the LI-200R Light Sensor?
- Weather resistant and durable in long-term outdoor deployments
- Measures global solar radiation under unobstructed natural daylight conditions
- Uniform sensitivity up to 82° incident angle
- Detachable sensor simplifies installation and removal, making it ideal for platforms with complex cabling
How does it work?
Image
The LI-200R measures global solar radiation with an unfiltered silicon photodiode. Its measurements correspond closely to first-class thermopiles when used outdoors under unobstructed natural daylight conditions.
The crown of the sensor rapidly sheds water, and also physically blocks light from outside the hemisphere of sensitivity, providing a precise cosine response.
Specifications
-
Calibrated against an Eppley Precision Spectral Pyranometer (PSP) under natural daylight conditions. Calibration uncertainty under these conditions is estimated as ± 3% typical, within ± 60° angle of incidence.*
-
Typically 75 μA per 1,000 W m-2
-
Maximum deviation of 1% up to 3,000 W m-2
-
Less than 1μs (2 m cable terminated into a 147 Ohm load)
-
± 0.15% per °C maximum
-
Cosine corrected up to 82° angle of incidence
-
< ± 1% error over 360° at a 45° elevation
-
No error induced from orientation
-
−40 °C to 65 °C
-
0% to 100% RH, Non-Condensing
-
High stability silicon photovoltaic detector (blue enhanced)
-
Weatherproof anodized aluminum body with acrylic diffuser and stainless steel hardware; O-ring seal on the sensor base
-
2.36 cm diameter × 3.63 cm0.93” diameter × 1.43”
-
24 g head; 60 g base/cable (2 m) with screws
-
2 m, 5 m, 15 m, 50 m6.5’, 16.4’, 49.2’, 164’
Absolute Calibration
Sensitivity
Linearity
Response Time
Temperature Dependence
Cosine Correction
Azimuth
Tilt
Operating Temperature Range
Relative Humidity Range
Detector
Sensor Housing
Size
Weight
Cable Length