Play Video
Product Image Viewer
˂
  • UA-001-64
  • UA-001-64
  • UA-001-64
˃

HOBO 64K Pendant® Temperature/Alarm (Waterproof) Data Logger

Part # UA-001-64
 
 

* All US online orders ship free over $250 (ground shipping only)

HOBO data loggers requires HOBOware software (USB interface cable included w/CD purchase) and a communications device. HOBOware Pro is required when using the U-DTW-1 Waterproof shuttle. See compatible items below.

Other Products in this Series

Overview

A miniature, waterproof one-channel temperature data logger, this model is value-priced for short-term shipping applications or long-term deployment. Data logger alarm LEDs flash if temperatures have exceeded user-set levels and delay options, and provide visible verification that temperatures have been within the desired range throughout deployment. This 64K model stores approximately 52K of 10-bit temperature readings. For accurate temperature measurement in sunlight a solar radiation shield is required (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).

Optical Interface for data transfer

Highlighted Features

  • Low-cost temperature with alarm indication or light intensity
  • Waterproof housing for wet or underwater use
  • Data readout in less than 30 seconds via fast Optic USB interface

In what environment does this data logger operate?

This data logger operates in indoor, outdoor and underwater environments.

What measurements does this data logger support?

The UA-001-64 data logger supports the following measurements: Temperature and Water Temp

A miniature, waterproof one-channel temperature data logger, this model is value-priced for short-term shipping applications or long-term deployment. Data logger alarm LEDs flash if temperatures have exceeded user-set levels and delay options, and provide visible verification that temperatures have been within the desired range throughout deployment. This 64K model stores approximately 52K of 10-bit temperature readings. For accurate temperature measurement in sunlight a solar radiation shield is required (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).

Optical Interface for data transfer

Highlighted Features

  • Low-cost temperature with alarm indication or light intensity
  • Waterproof housing for wet or underwater use
  • Data readout in less than 30 seconds via fast Optic USB interface

In what environment does this data logger operate?

This data logger operates in indoor, outdoor and underwater environments.

What measurements does this data logger support?

The UA-001-64 data logger supports the following measurements: Temperature and Water Temp

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement range: -20° to 70°C (-4° to 158°F)
Alarms: High and low alarms can be configured for total amount of contiguous or non-contiguous time outside of user-defined limits between -20° and 70°C (-4° to 158°F)
Accuracy: ± 0.53°C from 0° to 50°C (± 0.95°F from 32° to 122°F), see Plot A in manual
Resolution: Temperature: 0.14°C at 25°C (0.25°F at 77°F), see Plot A in manual
Drift: Less than 0.1°C/year (0.2°F/year)

Response Time
Airflow of 2 m/s (4.4 mph): 10 minutes, typical to 90%
Water: 5 minutes, typical to 90%
Time accuracy: ± 1 minute per month at 25°C (77°F), see Plot B in manual

Operating Range
In water/ice: -20° to 50°C (-4° to 122°F)
In air: -20° to 70°C (-4° to 158°F)

Water depth rating: 30 m from -20° to 20°C (100 ft from -4° to 68°F), see Plot C in manual
NIST traceable certification: Available for temperature only at additional charge; temperature range -20° to 70°C (-4° to 158°F)
Battery life: 1 year typical use
Battery Type: CR2032

Memory
UA-001-08: 8K bytes (approximately 6.5K sample and event readings)
UA-001-64: 64K bytes (approximately 52K sample and event readings)
Materials: Polypropylene case; stainless steel screws; Buna-N o-ring
Weight: 15.0 g (0.53 oz)
Dimensions: 5.8 x 3.3 x 2.3 (centimeters) and 2.3 x 1.3 x 0.9 (inches)

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).

    • HOBO UA-001-64 Pendant Temperature/Alarm (Waterproof) 64K Data Logger

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Customers Also Bought

BASE-U-1

The Pendant Base Station and Coupler provide fast optical infrared (IR) communication for easy data logger launch and readout of HOBO Pendant data loggers. The Base Station connects via USB to a host computer, while the Coupler attaches the data logger to the Base Station for communications. The Pendant Base Station offloads full 64K data logger in 30 seconds or a full 8K data logger in 6 seconds, and is splash resistant.

Add to Cart
Add to Quote
Compare Product

Compare
RS1

The solar radiation shield is recommended for temperature and relative humidity measurement accuracy in locations exposed to direct or reflected solar radiation. Mounts on tripods, masts, or flat vertical surfaces. The RS1 is ideal for use with loggers such as the HOBO MX2300, HOBO Pendant and U-Series data loggers. The following loggers require mounting brackets for use with the RS1:

  • HOBO MX2301 or MX2305 loggers require the MX2300-RS-BRACKET
  • HOBO U22 or U23-001 loggers require the U23 Clamp Kit .
Add to Cart
Add to Quote
Compare Product

Compare
U-DTW-1

The HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof Shuttle can also be used as a base station.

NOTE: Couplers are included for compatibility with our U-series loggers with optical communication, including the UA Pendants, U20 water level, U22 Water Temp Pro, UTBI TidbiT, U23 Pro Temp/RH, U24 Conductivity and U26 DO data loggers.

Add to Cart
Add to Quote
Compare Product

Compare
U22-001

Optical Interface for data transferThe HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible  to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed