Play Video

HOBO Water Temperature Pro v2 Data Logger

Part # U22-001
 
Water Temperature (400 ft.)
 
$129

*All online orders ship free over $100 (ground shipping only)

HOBO data loggers requires HOBOware software (USB interface cable included w/CD purchase) and a communications device. HOBOware Pro is required when using the U-DTW-1 Waterproof shuttle. See compatible items below.

Overview

Optical Interface for data transferThe HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible  to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

Highlighted Features

  • Research-grade measurements at an affordable price
  • Waterproof to 120 meters (400 feet)
  • Data readout in less than 30 seconds via fast Optic USB interface
  • Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis

In what environment does this data logger operate?

This data logger operates in outdoor and underwater environments.

What measurements does this data logger support?

The U22-001 data logger supports the following measurements: Temperature and Water Temp

Optical Interface for data transferThe HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible  to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

Highlighted Features

  • Research-grade measurements at an affordable price
  • Waterproof to 120 meters (400 feet)
  • Data readout in less than 30 seconds via fast Optic USB interface
  • Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis

In what environment does this data logger operate?

This data logger operates in outdoor and underwater environments.

What measurements does this data logger support?

The U22-001 data logger supports the following measurements: Temperature and Water Temp

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Operation range: -40° to 70°C (-40° to 158°F) in air; maximum sustained temperature of 50°C (122°F) in water
Accuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution: 0.02°C at 25°C (0.04°F at 77°F)
Response time: (90%) 5 minutes in water; 12 minutes in air moving 2 m/sec (typical)
Stability (drift): 0.1°C (0.18°F) per year
Real-time clock: ± 1 minute per month 0° to 50°C (32° to 122°F)
Battery: 2/3 AA, 3.6 Volt Lithium, factory-replaceable ONLY
Battery life (typical use): 6 years with 1 minute or greater logging interval
Memory (non-volatile): 64K bytes memory (approx. 42,000 12-bit temperature measurements)
Weight: 42 g (1.5 oz)
Dimensions: 3.0 cm (1.19 in.) maximum diameter, 11.4 cm (4.5 in.) length; mounting hole 6.3 mm (0.25 inches) diameter
Wetted materials: Polypropylene case, EPDM® o-rings, stainless steel retaining ring
Buoyancy (fresh water): +13 g (0.5 oz.) in fresh water at 25°C (77°F); +17 g (0.6 oz.) with optional boot
Waterproof: To 120 m (400 ft.)
Shock/drop: 1.5 m (5 ft.) drop at 0°C to 70°C (32°F to 150°F)
Logging interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.
Launch modes: Immediate start and delayed start
Offload modes: Offload while logging; stop and offload
Battery indication: Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
NIST certificate available: for additional charge

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

IMPORTANT: The plastic case will become brittle at temperatures lower than -20°C. If the logger is deployed in a location where the temperature drops below -20°C, make sure the logger remains stationary and is not pulled on or struck. Return the logger to above -20°C before handling.

Documentation for the U22-001

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Customers Also Bought

$124
BASE-U-4

The Universal Optic USB Base Station and couplers are used to offload data from any HOBO® data logger with an Optic USB interface. The splash-resistant Optic USB Base Station connects to your computer via USB, while connecting to the data logger via an appropriate coupler. This is compatible with the HOBO UA, U20, U22, U23, UTBI, U24 & U26 series.

NOTE: Couplers for all compatible data loggers are included with the BASE-U-4. Couplers are included for compatibility with six of our most popular data logger types including: UA Pendants, U20 water level data loggers, the U22 Water Temp Pro v2, our UTBI TidbiT, U24 Conductivit,y and U23 data loggers.

Add to Cart
Add to Quote
Compare Product

Compare
$99
BHW-PRO-CD

Powerful, Intuitive, One-of-a-Kind: Put your data to productive use with HOBOware® Pro software. Plot or export data to spreadsheets to conduct analysis necessary for your project. HOBOware® Pro is easy to set up and its intuitive, point-and-click interface makes it simple to run. This data logging application is compatible with all HOBO data loggers and wireless data nodes.

If you would like to buy the download only version, click the link below:
Download-Only Version

Add to Cart
Add to Quote
Compare Product

Compare
$245
CASE-PELICAN-1510

The largest, most durable airline-legal carry-on available, the new 1510 Pelican case provides safe and convenient transport of your HOBO data logging equipment. This watertight, crush-proof, and dust-proof case features a sturdy but lightweight design that includes a Pick N Pluck™ foam interior, 17” retracting extension handle, strong polyurethane wheels, stainless steel hardware, padlock protectors, and a lifetime guarantee of excellence.

Add to Cart
Add to Quote
Compare Product

Compare
$249
U-DTW-1

The HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof Shuttle can also be used as a base station.

NOTE: Couplers are included for compatibility with our U-series loggers with optical communication, including the UA Pendants, U20 water level, U22 Water Temp Pro, UTBI TidbiT, U23 Pro Temp/RH, U24 Conductivity and U26 DO data loggers.

Add to Cart
Add to Quote
Compare Product

Compare