0 - 50 AMP Split-core AC Current Transformer Sensor

Part # T-MAG-SCT-050
0.75” Opening
This product is discontinued.


The Magnelab AC Current 0-50 Amp AC Current Transformer or CT (Magnelab part # SCT-0750-050) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is accurate current measurement for many types of equipment, including variable frequency drives and switched power sources. One or two CTs can be used with each FlexSmart TRMS Module.

Highlighted Features

  • UL recognized
  • Split-core design for fast, easy installation
  • Precision burden resistor
  • 8 ft. 22 AWG twisted pair leads
  • 0.75” Opening

In what environment does this sensor operate?

This sensor operates in an indoor environment.

What measurements does this sensor support?

The T-MAG-SCT-050 sensor supports the following measurement: AC Current

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

  • Rated input from 1 Amp to 200 Amp
  • Output 0.333 Volt AC at rated current
  • Operates from 30 Hz to 1,000 Hz
  • Phase angle < 2 degrees measured at 50% rated current
  • Linearity accuracy ± 1%
  • 8 ft. twisted-pair lead
  • UL, c(UL) recognized, CE, and RoHS compliant
  • Accuracy at 10% to 130% of rated current
  • Custom output and other parameters are available
HOBO U30-NRC Weather Station Starter Kit
HOBO U30-NRC Weather Station Starter Kit
Measurement and Verification (power monitoring) System - Single Phase
Measurement and Verification (power monitoring) System - 3 Phase
kWh Monitoring Kit – UX90 with WattNode Sensors
USB Data Loggers - optional external sensors
4-Channel Pulse
4-Channel Pulse
USB Data Loggers - requires external sensor
Micro Station
U30 USB Weather Station
Extended Memory State
H22 Energy
Web-based Monitoring Systems - via remote communication
U30 Cellular
U30 Ethernet
Wireless Data Nodes - via receiver/USB
Four-Channel Data Node
Four External Channel Data Node
FlexSmart TRMS Module (2 channels)
WattNode 208/240 VAC 1,2, or 3 Phase Wye kWh Transducer
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer
WattNode 208/240 VAC 3-phase Delta/Wye kWh Transducer
Electronic Switch Pulse Input Adapter - 6 meters
FlexSmart TRMS Module (2 channels) w/modular plug
Electronic Switch Pulse Input Adapter - 1 meter
WattNode 208-240VAC 2 or 3 Branch Circuit kWh Transducer
E50B2 Power & Energy Meter
Documentation for the T-MAG-SCT-050

Link to Magnelab website

10270-MAN-MAGNELAB-CT logo
Magnelab AC Current Transformer (T-MAG-SCT-XXX) Connection Instructions

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.

On-demand Webinars & Videos