100 Amp Accu-CT Split-Core Current Transformer 333mV Sensor

Part # T-ACT-0750-100
 
0.78”(20mm) Opening
 
$45

Overview

The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

Highlighted Features

  • Unprecedented Linearity
  • Window Opening 0.75 Inch
  • The Accu-CT revenue grade, split-core current transformer offers outstanding linearity and phase angle accuracy with a unique one-handed opening and closing mechanism.
  • Safe: burden resistor built-in, 333 mVac voltage output at rated full scale current, no shorting blocks needed
  • IEEE C57.13 and IEC 60044-1 accuracy: over full temperature range and down to 1% of rated current
  • Exceptionally low phase angle error: essential for accurate power and energy measurements
  • Glove-friendly: easy to open and install with one hand while wearing safety gloves
  • Approvals: UL recognized, CE mark, RoHS

In what environment does this sensor operate?

This sensor operates in an indoor environment.

What measurements does this sensor support?

The T-ACT-0750-100 sensor supports the following measurements: AC Current and Amps (A)

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Accuracy: ±0.75% from 1% to 120% of rated primary current
Phase angle: ±0.5 degrees (30 minutes) from 1% to 120% of rated current
Accuracy standards: IEEE C57.13 class 1.2 and IEC 60044-1 class 1.0
Primary rating: 5 to 250 Amps, 600 Vac, 60 Hz nominal
Output: 333.33 mVac at rated current
Operating temperature: -30°C to 55°C
Safe: integral burden resistor, no shorting block needed, unlessotherwise noted
Standard lead length: 8 ft (2.4 m), 18 AWG
UL recognized, CE mark, RoHS
Assembled in USA: qualified under Buy American provision in ARRA of 2009

USB Data Loggers - requires external sensor
Micro Station
$231
H22 Energy
$364
U30 USB Weather Station
 
State
$92
Extended Memory State
$121
Kits
kWh Monitoring Kit – UX90 with WattNode Sensors
 
HOBO U30-NRC Weather Station Starter Kit
$1459
Web-based Monitoring Systems - via remote communication
RX3000 Remote Monitoring Station
 
Sensors
FlexSmart TRMS Module (2 channels)
$95
FlexSmart TRMS Module (2 channels) w/modular plug
$105
Electronic Switch Pulse Input Adapter - 1 meter
$74
Electronic Switch Pulse Input Adapter - 6 meters
$79
E50B2 Power & Energy Meter
$599
WattNode 208/240 VAC 3-phase Delta/Wye kWh Transducer
$269
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer
$269
WattNode 208/240 VAC 1,2, or 3 Phase Wye kWh Transducer
$229
WattNode 208-240VAC 2 or 3 Branch Circuit kWh Transducer
$249
USB Data Loggers - optional external sensors
4-Channel Pulse
$215
4-Channel Pulse
$325
Wireless Data Nodes - via receiver/USB
Four-Channel Data Node
$329
Four External Channel Data Node
$241
Documentation for the T-ACT-0750-100

 
17053-T-ACT-0750-Manual logo
Continental Control Systems (CCS) ACT Series Split-Core Current Transformer (CT) Connection Instructions


The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.

On-demand Webinars & Videos