U-DT-1

The HOBO U-Shuttle Data Transporter provides convenient in-field data offload and relaunch of HOBO U-series loggers and HOBO Weather Stations, Micro Stations, and HOBO Energy Logger Pro systems. The U-Shuttle's 2 x 16-character display shows current readings (for selected loggers), and logger status. An Optic USB Base Station is required for use with Optic USB loggers.

Onset offers a range of data retrieval and communications options to make data offload from HOBO loggers fast and easy.

Environment: Indoor Outdoor Measurement: N/A		Product ID: U-DT-1 Product Name: HOBO® U-Shuttle Product Type: Communications

Requirements:
HOBOware 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station

Compatibility:
All U-Series loggers, HOBO Weather Stations and Micro Stations (H21), and HOBO FlexSmart loggers (H22); not compatible with the HOBO Waterproof Shuttle (U-DTW-1)

Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models

Operating temperature: 0° to 50°C (32° to 122°F)

Storage temperature :-10° to 50°C (14° to 122°F)

Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A

Logger-to-shuttle transfer speed:
USB/optic: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds

Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer

Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers

Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)

Ports:
RJ-12 jack for communicating with smart sensors
mini-B full speed USB port for communicating with host computer
full speed USB port for communicating with U-Series loggers and base stations
high speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time.

Batteries Main: 2 AA alkaline batteries

Clock backup: 1 CR1225 lithium battery (3 V)

Battery life Main: One year or approximately 50 complete memory fills, typical use

Clock backup: 10 years typical use (with main batteries installed)

Weight: 153 g (5.4 oz)

Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)

Case materials: ABS case with urethane rubber grips, polycarbonate label

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).