Product Image Viewer
˂
  • RXMOD-A1
  • RXMOD-A1
  • RXMOD-A1
  • RXMOD-A1
˃

RX3000 4-channel Analog Module

Part # RXMOD-A1
 
 

This product requires an RX3000 Remote Monitoring Station.

Overview

The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements.  These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.

Highlighted Features

  • 15-bit resolution and high accuracy
  • Each module can have its own logging rate
  • Input ranges up to 33V

The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements.  These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.

Highlighted Features

  • 15-bit resolution and high accuracy
  • Each module can have its own logging rate
  • Input ranges up to 33V

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Input Channels

Four, single-ended, in addition to smart sensor data channels

Measurement Range and Accuracy

0–25.6 mA DC, ±5 µA ± 0.15% of reading
0–2.5 V DC, ±0.25 mV ±0.2% of reading
0–5 V DC, ±0.25 mV ±0.2% of reading
0–10 V DC, ±0.3 mV ±0.2% of reading
0–20 V DC, ±0.6 mV ±0.2% of reading
0–33 V DC, ±1.20 mV ±0.2% of reading

Resolution

15 bits

Field Wiring

Two- or three-wire via screw terminals, 16–24 AWG

Minimum/Maximum Input Voltage

0/33 V DC

Minimum/Maximum Input Current

0/25.6 mA

Minimum Source Impedance for Current Measurement

20 KΩ

Excitation Voltage

12 V DC ±5% at 200 mA maximum per module

Documentation for the RXMOD-A1

Customers Also Bought

RX3000

The HOBO RX3000 is Onset’s next-generation remote data logging station that provides instant access to site-specific environmental data anywhere, anytime via the internet. The new station combines the flexibility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation. The RX3000 has three configurable systems, that can be configured below, that consist of the following part numbers: RX3001-00-01, RX3002-00-01, and RX3003-00-01.

RXMOD-R1

The optional Relay Module allows for up to three individual relays to be activated or pulsed in response to alarms.  Each relay contact closure can be configured as normally open or normally closed through HOBOlink. A HOBO RX3000 is required for this product.

Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed