External DC Power Cable for RX3000

Part # CABLE-RX-PWR
 
 
$25

Overview

The external DC power cable (CABLE-RX-PWR) is used to connect a user-supplied power source to the HOBO RX3000 Monitoring Station to charge the station’s internal battery. The external power source can be an intermittent power source, such as a 6W or larger solar panel. The external power source must be able to supply 6W, but the average power used will be much less and depends on the number and type of sensors, logging interval, and the frequency of internet connections.

The external DC power cable (CABLE-RX-PWR) is used to connect a user-supplied power source to the HOBO RX3000 Monitoring Station to charge the station’s internal battery. The external power source can be an intermittent power source, such as a 6W or larger solar panel. The external power source must be able to supply 6W, but the average power used will be much less and depends on the number and type of sensors, logging interval, and the frequency of internet connections.

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Specifications
Wires: Two internal 18-AWG, unstripped
Length: 1.83 m (6 ft) cable

External Power Source Requirements
Voltage: 5 V DC minimum to 17 V DC maximum
Minimum supply output power: 6 Watt (typical power used is much less)

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.

Upcoming Webinars & Courses
On-demand Webinars & Videos