Self-Describing 6-foot Pipe Temperature Sensor
SD-TEMP-P-06 Self-Describing 6-foot Pipe Temperature  Sensor
˂
  • SD-TEMP-P-06 Image 1
  • SD-TEMP-P-06 Image 2
˃
Part # SD-TEMP-P-06

Self-Describing 6-foot Pipe Temperature Sensor


Overview

For use with HOBO MX1104 and MX1105 multi-channel data loggers, this temperature sensor, which is suitable for pipe mounting, offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.

  • Self-Describing technology for quick, easy set up
  • Locking jack to ensure sensor is connected and stays connected
  • Measurement range of -40° and 100°C (-40° to 212°F)
  • Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)
  • Available in 1.8 m (6 ft)
  • Faster response time
  • Suitable for pipe mounting

In what environment does this sensor operate?

This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?

The SD-TEMP-P-06 sensor supports the following measurements: Soil Temperature and Temperature

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement Range -40° to 100°C (-40° to 212°F)
Accuracy ±0.15°C from 0° to 50°C (±0.27°F from 32° to 122°F), insert probe 2.3 cm (0.9 inches) minimum; see Plot A
Resolution 0.002° at 25°C (0.003° at 77°F)
Drift <0.1°C (<0.2°F) per year
Response Time in Air 2 minutes typical to 90% in air moving 1 m/s (2.2 mph)
Response Time on a Pipe Typically 2 times faster than the SD-TEMP-xx air/water/soil temperature probe; typically less than 1 minute to 90%
Probe Housing Copper-plated sensor tip
Probe Dimensions 0.9 x 5.8 cm (0.38 x 2.3 inches)
Cable Length 1.8 m (6 ft)
Documentation for the SD-TEMP-P-06

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.

Customers Also Bought

MX1104

Measures and transmits temperature, relative humidity, and light intensity data wirelessly. Includes an external analog input to attach a variety of additional sensors.

This self-contained, Bluetooth-enabled, wireless data logger lets you use your mobile device or Windows computer and Onset's free HOBOconnect app to access data, at any time, when within 100 feet of the logger. Configure the logger, read out data, view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files - with no dedicated equipment beyond a mobile device or laptop.

Add the MX Gateway for remote access to your data in our cloud-based HOBOlink software.

Compare Product

Compare
MX1105

With four channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device or Windows laptop via Bluetooth technology.

Ideal for energy audits, building commissioning studies, equipment scheduling, and more, this self-contained, Bluetooth-enabled, wireless data logger lets you use your mobile device or Windows computer and Onset's free HOBOconnect app to access data, at any time, when within 100 feet of the logger. Configure the logger, read out data, view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files - with no dedicated equipment beyond a mobile device or laptop.

Add the MX Gateway, for remote access to your data in Onset's cloud-based HOBOlink software. 

Compare Product

Compare
MXGTW1

The MX Gateway automatically transmits HOBO MX Bluetooth Low Energy (BLE) logger data to Onset's cloud-based HOBOlink software. The MX Gateway is ideal for obtaining remote access to data from multiple HOBO MX data loggers monitoring indoor environmental conditions in office buildings, residential environments, warehouses, indoor growing facilities, server rooms, museums, and more. The MX Gateway communicates with compatible HOBO MX data loggers through the HOBOconnect app on a mobile device or Windows computer. 

You can download the HOBOconnect app here: 

[custom:hoboconnect_download_buttons]

Add to Cart
Compare Product

Compare
SD-CT-xxx

For use with HOBO MX1104 and MX1105 multi-channel data loggers, this split-core AC current transformer offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.

Add to Cart
Compare Product

Compare

Recently Viewed