All Parts & Accessories
- HomePlug AV powerline communication
- Dimensions (W x D x H): 2.6 x 2.0 x 1.1 in.
- US standard 2-prong plug
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.
The Anti-Biofouling Copper Guard can be used in addition to the standard electrode guard for protection against biofouling during deployment. The anti-biofouling guard uses copper to reduce biofouling, while still allowing proper water flow to the sensor.
With its gel electrolyte and double Pellon® junction minimizing the chance of contamination of the reference electrolyte, this plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are perfectly suited for environmental monitoring of streams, lakes, rivers, estuaries, and oceans. The electrode uses potentiometric and temperature measurements of samples to determine the pH, and can easily be replaced because of the simple plug-and-play 3.5-mm connector. Following proper calibration, storage, and maintenance protocols for the electrode, the MX2501 can achieve pH accuracies of ±0.10 pH units within ±10°C of temperature at calibration.
The replacement pH electrode replaces the original pH electrode that ships with the HOBO MX2501 logger. The electrodes should be replaced after six months of use.
NOTE: pH electrodes should always be stored in storage solution when not deployed.
The HOBOnet Wireless Repeater is designed to work with the HOBOnet Wireless Sensor Network. The repeater is ideal when there is an obstruction between wireless sensors and the RX3000 station or for extending the transmission range of wireless sensors in the network.
The HomePlug AV200 powerline adapter uses your home's existing electrical wiring to create a direct connection between your EG4100 Series meter and a home network. This connection requires no additional wiring so you can simply plug the adapter into an existing power socket to instantly establish a networking infrastructure.