HOBO Deep Ocean Temperature Data Logger
HOBO data loggers require HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.
Overview
The HOBO U12 Deep Ocean Water Temperature Data Logger is a single-channel water temperature logger with 12-bit resolution that can record up to 43,000 measurements. With its robust titanium housing, this logger is designed to withstand ocean extremes of depth and temperature.
- 11,000m depth rating (36,080 ft)
- Extended temperature range:- -40 to 125C
- Titanium housing for use in saltwater
- Fast readout via direct USB interface
- Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
In what environment does this data logger operate?
This data logger operates in an water environment.
What measurements does this data logger support?
The U12-015-03 data logger supports the following measurements: Temperature and Water Temperature
The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.
Choose measurement system:
Some specifications display both measurement systems and/or refer to other similar products when mentioned.
| Logger | |
| Measurement Range | -40° to 125°C
(-40° to 257°F)
|
| Accuracy | ±0.22°C at 25°C , see manual for plot
(±0.4°F at 77°F , see manual for plot)
|
| Resolution | 0.025°C at 25°C , see manual for plot
(0.045°F at 77°F , see manual for plot)
|
| Response Time in Water | < 4 minutes, typical to 90% |
| Operating Environment | Air, water, steam, 0 to 100% RH |
| Operating Temperature | Logging: -40° to 125°C (-40° to 257°F) Launch/Readout: 0° to 50°C (32° to 122°F), per USB specification |
| Battery Life | 3 years typical use, factory replaceable |
| Memory | 64K bytes (43,000 12-bit measurements) |
| Construction | Titanium with O-ring seals and backup rings |
| Weight | 105 g
(3.7 oz)
|
| Size | 114 x 20.6 mm diameter (4.5 x 0.81 in. diameter) |
| Depth Rating | 11,000 m
(36,080 ft)
|
| Environmental Rating | IP68 |
| NIST Certificate | Available for additional charge; temperature range -30° to 120°C (-22° to 248°F) |
| Compliance Marks |
|
- HOBO U12-015-03 Deep Ocean Temperature Data Logger
- O-Ring replacement kit: four blue O-Rings, four orange backup rings, and silicone-based O-Ring lube
The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.
Customers Also Bought
The HOBO U12 Stainless Temperature Data Logger is ideal for food, pharmaceutical, autoclave, and other applications where high-accuracy temperature data is critical. With its broad temperature range (-40 to 125C) and food-grade stainless steel housing, the U12 Stainless Temperature Data Logger withstands process conditions from pasteurization to flash freezing and washdown. The U12 Stainless is also ideal for high-temperature or deep underwater applications.
The HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2's optical USB interface makes it possible to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).
A miniature, waterproof one-channel temperature data logger, this model is value-priced for short-term shipping applications or long-term deployment. Data logger alarm LEDs flash if temperatures have exceeded user-set levels and delay options, and provide visible verification that temperatures have been within the desired range throughout deployment. This 64K model stores approximately 52K of 10-bit temperature readings. For accurate temperature measurement in sunlight a solar radiation shield is required (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).
Only 3x4 cm, this tiny data logger measures temperatures over a wide temperature range. The TidbiT v2 provides 12-bit resolution and has ±0.2 °C accuracy. It is designed for outdoor and underwater environments and is waterproof to 300 m (1000 ft). An optical USB interface allows users to offload data in seconds. Please note, a solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).
Recently Viewed
Detailed Specifications
HOBO Deep Ocean Temperature Data Logger
Choose measurement system:
Some specifications display both measurement systems and/or refer to other similar products when mentioned.
| Logger | |
| Measurement Range | -40° to 125°C
(-40° to 257°F)
|
| Accuracy | ±0.22°C at 25°C , see manual for plot
(±0.4°F at 77°F , see manual for plot)
|
| Resolution | 0.025°C at 25°C , see manual for plot
(0.045°F at 77°F , see manual for plot)
|
| Response Time in Water | < 4 minutes, typical to 90% |
| Operating Environment | Air, water, steam, 0 to 100% RH |
| Operating Temperature | Logging: -40° to 125°C (-40° to 257°F) Launch/Readout: 0° to 50°C (32° to 122°F), per USB specification |
| Battery Life | 3 years typical use, factory replaceable |
| Memory | 64K bytes (43,000 12-bit measurements) |
| Construction | Titanium with O-ring seals and backup rings |
| Weight | 105 g
(3.7 oz)
|
| Size | 114 x 20.6 mm diameter (4.5 x 0.81 in. diameter) |
| Depth Rating | 11,000 m
(36,080 ft)
|
| Environmental Rating | IP68 |
| NIST Certificate | Available for additional charge; temperature range -30° to 120°C (-22° to 248°F) |
| Compliance Marks |
|
