Part Number - RX3000-INDOOR
RX3000 Indoor Remote Monitoring Station
Important Information
Requires a HOBOlink data plan, which must be renewed annually. Learn more about HOBOlink.
Compatible with
Overview
Onset's most flexible remote data logging station, provides instant access to site-specific indoor environmental data anywhere, at any time, via the internet. This configurable station combines the versatility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation.
Features
- Flexible support for a broad range of sensors
- LCD display for easy deployment
- Cloud-based data access through HOBOlink
- Get 24/7 web access to your data via web browser
- Verify RX3000 system status remotely
- Set up and manage alarm notifications over the web
- Schedule automated delivery of data
- Plug-and-play operation
- Alarm notifications via text, email
- Configurable from your mobile device
- Optional analog input, relay, and water level sensor modules
Build a system
Specifications
Operating Range |
-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC |
Smart Sensor Connectors |
10 |
Smart Sensor Network Cable Length |
100 m (328 ft) maximum |
Smart Sensor Data Channels |
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details) |
Module Slots |
2 |
Logging Rate |
1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18 hours |
Time Accuracy |
±8 seconds per month in 0° to 40°C (32°F to 104°F) range; |
Battery Type/Power Source |
4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR) |
Rechargeable Battery |
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life |
Memory |
32 MB, 2 million measurements, continuous logging |
Alarm Notification Latency |
Logging interval plus 2–4 minutes, typical |
Enclosure Access |
Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
LCD |
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
Materials |
Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish |
Size |
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page |
Weight |
2.2 kg (4.85 lb) |
Mounting |
3.8 cm (1.5 inch) mast or wall mount |
Environmental Rating |
Weatherproof enclosure, NEMA 4X (requires proper installation of cable channel system) |
Image
![]()
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
Compliance Symbols |
RX3002: FCC ID R68XPICOW, IC ID 3867A-XPICOW |
Wireless Radio |
RX3003: |
Antenna |
RX3003: Penta band |
Ethernet (RX3001) |
|
Connector |
One RJ45/100BaseT |
Wi-Fi (RX3002) | |
Network Standards |
IEEE 802.11b/g/n |
Frequency Range |
2.412–2.484 GHz |
Antenna Connector |
1, no diversity supported |
Data Rates |
1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps) |
Number of Selectable Radio Subchannels |
Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries) |
Radio Modulations |
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM |
Security |
WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2, protocols not listed are not supported |
Maximum Receive Level |
-10 dBm (with PER <8%) |
Receiver Sensitivity |
-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps, |
Cellular (RX3003 and RX3004) |
|
Wireless Radio |
RX3003: |
Antenna |
RX3003: Penta band |