HOBO RX3000 Remote Monitoring Station Data Logger
Play Video
RX3000 HOBO RX3000 Remote Monitoring Station Data Logger
˂
  • RX3000 Image 1
  • RX3000 Image 2
˃
Part # RX3000

HOBO RX3000 Remote Monitoring Station Data Logger

Starting at

Important Info

HOBOware software and USB cable are required for initial setup of Wi-Fi units or Ethernet units with Static IP addresses. HOBOlink is a web-enabled software platform designed for the RX3000. Learn more.

Other Products in this Series Learn More

Overview

 

The HOBO RX3000, Onset's most flexible remote data logging station, provides instant access to site-specific environmental data anywhere, anytime via the internet. The station combines the versatility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation. The RX3000 is a configurable system (see "Configure System" tab below). 

Only need cellular?  For a cellular-only solution, the HOBOnet MicroRX Station (RX2105) offers easy-to-deploy, affordable, wireless indoor monitoring.

 
  • Flexible support for a broad range of sensors
  • LCD display for easy deployment
  • Cloud-based data access through HOBOlink
    • Get 24/7 web access to your data via web browser
    • Verify RX3000 system status remotely
    • Set up and manage alarm notifications over the web
    • Schedule automated delivery of data
  • Plug-and-play operation
  • Alarm notifications via text, email
  • Cellular, Wi-Fi, and Ethernet options are available
  • Configurable from your mobile device
  • Optional Analog Input, Relay, and Water Level Sensor Modules

In what environment does this data logger operate?

This data logger operates in an indoor environment.

What measurements does this data logger support?

The RX3000 data logger supports the following measurements: Relative Humidity and Temperature

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Operating Range

-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC

Smart Sensor Connectors

10

Smart Sensor Network Cable Length

100 m (328 ft) maximum

Smart Sensor Data Channels

Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details)

Module Slots

2

Logging Rate

1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18 hours

Time Accuracy

±8 seconds per month in 0° to 40°C (32°F to 104°F) range;
±30 seconds per month in -40° to 60°C (-40° to 140°F) range

Battery Type/Power Source

4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR)

Rechargeable Battery
Service Life

Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life

Memory

32 MB, 2 million measurements, continuous logging

Alarm Notification Latency

Logging interval plus 2–4 minutes, typical

Enclosure Access

Hinged door secured by two latches with eyelets for use with user-supplied padlocks

LCD

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

Materials

Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish

Size

18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page

Weight

2.2 kg (4.85 lb)

Mounting

3.8 cm (1.5 inch) mast or wall mount

Environmental Rating

Weatherproof enclosure, NEMA 4X (requires proper installation of cable channel system)

ce

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

FCC Logo Australia/New Zealand General Compliance mark Taiwan NCC Mark Australia/New Zealand General Compliance markSouth Korea KC Certification for Electrical and Electronic Products

RX3002: FCC ID R68XPICOW, IC ID 3867A-XPICOW
RX3003: FCC ID QIPEHS6, IC ID 7830A-EHS6; approved for use in Taiwan and Japan
RX3004: FCC ID QIPPLS62-W, IC ID:7830A-PLS62W

Wireless Radio

RX3003:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz, UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz
RX3004:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz

Antenna

RX3003: Penta band
RX3004: 4G LTE

 

Ethernet (RX3001)

Connector

One RJ45/100BaseT

Wi-Fi (RX3002)

Network Standards

IEEE 802.11b/g/n

Frequency Range

2.412–2.484 GHz

Antenna Connector

1, no diversity supported

Data Rates

1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps)

Number of Selectable Radio Subchannels

Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries)

Radio Modulations

OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM

Security

WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2, protocols not listed are not supported

Maximum Receive Level

-10 dBm (with PER <8%)

Receiver Sensitivity

-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps,
-90 dBm for 2.0 Mbps, -92 dBm for 1.0 Mbps

Cellular (RX3003 and RX3004)

Wireless Radio

RX3003:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz, UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz
RX3004:
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz

Antenna

RX3003: Penta band
RX3004: 4G LTE

x

x

x

x

x

1. Communication

A. Choose your communication option:

B. Choose your data plan:


x

x

x

x

x

2. Power


SOLAR-5W
5 Watt Solar Panel
This solar panel is suitable for most locations. Includes 45-degree bracket for mast mounting.

See product page

$79

SOLAR-15W
15 Watt Solar Panel
This solar panel is ideal for very cloudy locations, higher latitudes, and/or when connecting analog sensors with high excitation power requirements.

See product page

$179

AC-U30
AC Power Adapter
120V, 60Hz AC linear power supply; output is 6 Volts DC, 2 Amps.

See product page

$45

AC-U30-EU
EU Compatible AC Power Adapter
AC Battery Charger - rated for 240V, 50Hz input power

See product page

$45

CABLE-RX-PWR
External DC Power Cable for RX3000
The external DC power cable (CABLE-RX-PWR) is used to connect a user-supplied power source to the HOBO RX3000 Monitoring Station to charge the station's internal battery. The external power source can be an intermittent power source, such as a 6W or larger solar panel. The external power source must be able to supply 6W, but the average power used will be much less and depends on the number and type of sensors, logging interval, and the frequency of internet connections.

See product page

$25

x

x

x

x

x

3. Environment

Choose where your logger will be deployed:


x

x

x

x

x

3. Wireless Sensors

Choose your HOBOnet wireless sensor(s):

Relative Humidity
HOBOnet Wireless Temp/RH Sensor (battery powered)
Items used with RXW-THC-B-xxx
Solar Radiation Shield
HOBOnet Repeater (solar powered)
Temperature
HOBOnet Wireless Temp Sensor
Items used with RXW-TMB-x-xxx
Solar Radiation Shield
HOBOnet Repeater (battery powered)
HOBOnet Wireless Temp Sensor
Items used with RXW-TMB-xxx
Solar Radiation Shield
HOBOnet Repeater (solar powered)

x

x

x

x

x

4. Wired Sensors

Choose your wired sensor(s):

Relative Humidity
Temperature/Relative Humidity (2m cable) Smart Sensor
Temperature/Relative Humidity (8m cable) Smart Sensor
Items used with above items
Solar Radiation Shield
Temperature
12-Bit Temperature Smart Sensor
Items used with S-TMB-M0xx
Solar Radiation Shield

x

x

x

x

x

5. Water Level

If you need water level measurement please select one sensor and one cable. A RXMOD-W1 is required and will be automatically added below.

If more than one water sensor is needed, please contact sales.

Select One Sensor: (Reset below)


MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$350

MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$350

MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$350

MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$350

MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$400

MX2001-S
Water Level
The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

See product page

$400

Select One Cable:

The 1, 5, 10, 15, 30, and 60 meter cables are typically in stock, while other cables are custom lengths with a 1-2 week lead time.

Water Level Sensor Module:


RXMOD-W1
Water Level Sensor Module for RX3000
​The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station. It is configured through HOBOlink, Onset's cloud-based software. For water level applications, a HOBO RX3000 station, water level sensor cable (CABLE-RWLMOD-XXX), and water level sensor (MX2001-0X-S or MX2001-0X-Ti-S) are required.

See product page

$130

Mounting: (RECOMMENDED)


WELL-CAP-02
Well Cap for MicroRX Water Level Stations
This locking well cap provides a convenient way to suspend HOBO MicroRX Water Level sensor cables in a well, and provides strain relief (especially important for long cables).

See product page

$59

x

x

x

x

x

5. Modules

What are these?
Please select up to two modules. Modules can be replaced for different station configurations.
0

x

x

x

x

x

6. Accessories

Batteries
Replacement 10 Ahr battery for U30 and RX3000
Communication Cables
USB Cable
Wireless Communications
HOBOnet Repeater (solar powered)

x

x

x

x

x

Please review your order:

Model:
Step 2. Power (Change)
0
Step 5. Modules (Change)
None chosen
0
0
0

Estimated Order Total: 0 USD

Qty:
RX3000 configuration has been added to the cart. Click here to checkout
    • HOBO RX3000 Remote Monitoring Station
    • Two plates for cable access openings with eight thumbscrews and one wrench
    • Two rubber cable channels
    • Rubber plugs
    • Grease packet
    • Two mounting plates with four screws
    • Grounding wire
    • Two U-bolts

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Tech Notes
Informational Pages
Additional Related Content

Customers Also Bought

RXMOD-A1

The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements.  These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.

Add to Cart
Compare Product

Compare
RXMOD-R1

The optional Relay Module allows for up to three individual relays to be activated or pulsed in response to alarms.  Each relay contact closure can be configured as normally open or normally closed through HOBOlink. A HOBO RX3000 is required for this product.

Add to Cart
Compare Product

Compare
RXMOD-W1

​The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station.  It is configured through HOBOlink, Onset's cloud-based software. For water level applications, a HOBO RX3000 station, water level sensor cable (CABLE-RWLMOD-XXX), and water level sensor (MX2001-0X-S or MX2001-0X-Ti-S) are required.

Add to Cart
Compare Product

Compare
S-WSET-B

The Wind Sensor Set includes Onset's research-grade plug-and-play Wind Speed Smart Sensor and the Wind Direction Smart Sensor. This combination provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval. These durable sensors will provide many years of accurate and reliable performance.

NOTE: Mount these on the M-CAA Full Cross Arm for proper sensor spacing for accurate wind measurement in all wind directions.

The cross arm must be mounted on a stable mast, using guy wires as needed to prevent the sensors from vibrating in high winds.

Interested in wireless sensors? The wireless Wind Speed and Direction sensor is available for use with the HOBOnet Field Monitoring System.

Add to Cart
Compare Product

Compare

Recently Viewed