Play Video
Product Image Viewer
˂
  • MX2305
  • MX2305
  • MX2305
  • MX2305
  • MX2305
˃

HOBO MX2305 Temperature Data Logger

Part # MX2305
 
Bluetooth Low Energy (BLE)
 

HOBO MX2300 data loggers require a compatible mobile device and the HOBOconnect app.  System requirements for the app can be found at the bottom of the HOBOconnect software page.

Learn More

Overview

The HOBO MX2305 is a weatherproof data logger with an internal temperature sensor. Leveraging Bluetooth Low Energy, the logger enables easy, fast set up and data download directly from your mobile device with Onset's free HOBOconnect app. The MX2305 provides high-accuracy measurements in harsh outdoor environments.

Add the MX Gateway for remote access to your data in Onset's cloud-based HOBOlink software. 

You can download the HOBOconnect app here:

  

  • Convenient wireless setup and download via Bluetooth Low Energy (100-foot range)
  • Retrieve data in hard-to-reach locations
  • Visual alarms alert you to out-of-range conditions
  • Compact, weatherproof housing with built-in mounting
  • View current data in real-time with Onset’s free HOBOconnect app
  • Share downloaded data easily from your mobile device
  • Accuracy: +/- 0.2C°

In what environment does this operate?

This operates in indoor and outdoor environments.

What measurements does this support?

The supports the following measurement: Temperature

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Temperature Sensor
Range MX2301A and MX2305 internal sensors: -40 to 70°C (-40 to 158°F)
MX2302A external temperature sensor: -40 to 70°C (-40 to 158°F)
MX2303 and MX2304 external sensors: -40 to 100°C (-40 to 212°F), with tip and cable immersion in fresh water up to 50°C (122°F) for one year
Accuracy ±0.25°C from -40 to 0°C (±0.45 from -40 to 32°F)
±0.2°C from 0 to 70°C (±0.36 from 32 to 158°F)
±0.25°C from 70 to 100°C (±0.45 from 158 to 212°F), MX2303 and MX2304 only
Resolution MX2301A and MX2302A: 0.02°C (0.036°F)
MX2303, MX2304, and MX2305: 0.04°C (0.072°F)
Drift <0.01°C (0.018°F) per year
Relative Humidity Sensor* (MX2301A, MX2302A only)
Range 0 to 100% RH, -40° to 70°C (-40° to 158°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%
Accuracy ±2.5% from 10% to 90% (typical) to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% RH and above 90% RH ±5% typical
Resolution 0.01%
Drift <1% per year typical
Response Time (typical, to 90% of change)
Temperature Without Solar Radiation Shield With RS1/M-RSA Solar Radiation Shield With RS3-B Solar Radiation Shield
MX2301A
internal sensor
17 minutes in air moving 1 m/sec 24 minutes in air moving 1 m/sec NA
MX2302A
external sensor
3 minutes, 45 seconds in air moving 1 m/sec 7 minutes, 45 seconds in air moving 1 m/sec 6 minutes, 30 seconds in air moving 1 m/sec
MX2303/MX2304
external sensors
3 minutes in air moving 1 m/sec; 20 seconds in stirred water 7 minutes in air moving 1 m/sec 4 minutes in air moving 1 m/sec
MX2305
internal sensor
17 minutes in air moving 1 m/sec 24 minutes in air moving 1 m/sec NA
RH Without Solar Radiation Shield With RS1/M-RSA Solar Radiation Shield With RS3-B Solar Radiation Shield
MX2301A
internal sensor
30 seconds in air moving 1 m/sec 40 seconds in air moving 1 m/sec NA
MX2302A
external sensor
15 seconds in air moving 1 m/sec 30 seconds in air moving 1 m/sec 30 seconds in air moving 1 m/sec
Logger
Operating Range -40° to 70°C (-40° to 158°F)
Radio Power 1 mW (0 dBm)
Transmission Range Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard Bluetooth Low Energy (Bluetooth Smart)
Logging Rate 1 second to 18 hours
Logging Modes Fixed interval (normal, statistics) or burst
Memory Modes Wrap when full or stop when full
Start Modes Immediate, push button, date & time, or next interval
Stop Modes When memory full, push button, date & time, or after a set logging period
Time Accuracy ±1 minute per month 0° to 50°C (32° to 122°F)
Battery Type 2/3 AA 3.6 Volt lithium, user replaceable
Battery Life 2 years, typical with logging interval of 1 minute and Bluetooth Always On enabled; 5 years, typical with logging interval of 1 minute and Bluetooth Always On disabled. Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.
Memory MX2301A and MX2302A: 128 KB (63,488 measurements, maximum)
MX2303, MX2304, and MX2305: 128 KB (84,650 measurements, maximum)
Full Memory Download Time Approximately 60 seconds; may take longer the further the device is from the logger
Dimensions Logger housing: 10.8 x 5.08 x 2.24 cm (4.25 x 2.0 x 0.88 in.)
External temperature sensor diameter: 0.53 cm (0.21 in.)
External temperature/RH sensor diameter: 1.17 cm (0.46 in.)
External sensor cable length: 2 m (6.56 ft)
Solar radiation shield bracket: 10.8 x 8.3 cm (4.25 X 3.25 in.)
Weight Logger: 75.5 g (2.66 oz)
Solar radiation shield bracket: 20.4 g (0.72 oz)
Materials Acetal, silicone gasket, stainless steel screws
Environmental Rating NEMA 6 and IP67
CE Compliant The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
FCC Logo Australia/New Zealand General Compliance mark  Japanese Telecom and Radio Certificaiton Mark South Korea KC Certification for Electrical and Electronic Products  

*Per RH sensor manufacturer data sheet

    • HOBO MX2305 Temp Data Logger
    • Screws
    • Cable ties

Customers Also Bought

M-RSA

Preassembled for quick deployment, the solar radiation shield is recommended for temperature and relative humidity measurement accuracy in locations exposed to direct or reflected solar radiation. Mounts on tripods, masts, or flat vertical surfaces. The following loggers require mounting brackets for use with the M-RSA:

Add to Cart
Add to Quote
Compare Product

Compare
MX2300-RS-BRACKET

This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield. 

Add to Cart
Add to Quote
Compare Product

Compare
RS1

The solar radiation shield is recommended for temperature and relative humidity measurement accuracy in locations exposed to direct or reflected solar radiation. Mounts on tripods, masts, or flat vertical surfaces. The RS1 is ideal for use with loggers such as the HOBO MX2300, HOBO Pendant and U-Series data loggers. The following loggers require mounting brackets for use with the RS1:

  • HOBO MX2301 or MX2305 loggers require the MX2300-RS-BRACKET
  • HOBO U22 or U23-001 loggers require the U23 Clamp Kit .
Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed