Sensors

All Products

    T-VER-PX3UL

    The T-VER-PX3UL transducer can measure either air pressure or velocity with the flip of a switch. The PX3 is available in three installation configurations: duct, panel or universal. Duct and panel models have two pressure and velocity range options: 0-1" WC / 0-3,000 ft/min or 0-10" WC / 0-7,000 ft/min with seven field-selectable sub-ranges for pressure and eight for velocity. All variants are available with and without display. The PX3 has an IP65/NEMA 4 environmental rating.

    Requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-EG-x000-2775

    Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.

    Technical Specifications

    • 333 mVrms at rated output
    • Accurate within 1% from 30A to stated current rating
    • 6' twisted pair lead with CT connector
    • Note: 30A minimum current required at all times. No external integrator required
    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-EG-xxxx-xxxx

    Split-core CTs from J&D Sensing offer a well constructed hinged body and are accurate to +/-1% from 1%-100% of their stated current rating. The small interval for physical size options (10mm/0.39", 24mm/0.94", and 36mm/1.42") allow for a flexible installation. Each CT size has a hinge and clipping mechanism, making it easy to close the CT in tight situations.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-DCI-F350-W5x3

    The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as products involving high EMI sensitivity or extreme temperature, or those where the sensing area is too small for typical probe-style sensors.

    The sensor requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-DCI-F300-1x3

    The F300 series is a versatile and rugged, high-performance air velocity and air temperature sensor. Designed with conformal coated electronics and sealed enclosure, the F300 is suitable for demanding applications, including those in corrosive or alkaline environments. With its robust, splash proof design, and UV tolerant construction, the F300 is designed to handle a wide range of product and process control air flow applications.

    The sensor requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    S-WSET-B

    The Wind Sensor Set includes Onset's research-grade plug-and-play Wind Speed Smart Sensor and the Wind Direction Smart Sensor. This combination provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval. These durable sensors will provide many years of accurate and reliable performance.

    NOTE: Mount these on the M-CAA Full Cross Arm for proper sensor spacing for accurate wind measurement in all wind directions.

    The cross arm must be mounted on a stable mast, using guy wires as needed to prevent the sensors from vibrating in high winds.

    Also available in a wireless model for use with the HOBOnet Field Monitoring System.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    S-WSB-M003

    Measure wind speed from 0 to 76 m/s (0 to 170 mph). This smart sensor provides data reporting average wind speed and highest 3 second gust for each logging interval. The starting threshold is 1 m/s (2.2 mph); sensor survives through 170 mph. This model comes with a 3m cable.

    NOTE: an M-CAA Full Cross Arm or a M-CAB Half Cross Arm is required for mounting.

    Also available in a wireless model for use with the HOBOnet Field Monitoring System

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-MINOL-130-NL

    Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for use with 3/4" pipes. (Use step-ups or step-downs to deploy the T-MINOL with 1/2" or 1" pipe diameters.)

    Add to Cart
    Add to Quote
    Compare Product

    Compare
Page 1 / 10