All Products

All Products

HOBO data loggers for monitoring indoor, outdoor, and underwater environments.



Download the Catalog!
    MX2001-S

    The MX2001-S Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-MAG-SPT-xxx

    The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage), but because this transformers ties directly into the line, it should be used only by qualified personnel.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    S-TMB-M0xx

    The 12-bit Temperature Smart Sensor provides < ± 0.2° C total accuracy (< ±0.36° F) and resolution of < ± 0.03° C (< ±0.054° F) over the range of from 0° to 50° C (32° to 122° F). The full measurement range is -40° to 100° C (-40° to 212° F). A selectable measurement-averaging feature further improves accuracy. Available in cable lengths of 2m, 6m and 17m.

    Also available in a wireless model for use with the HOBOnet Field Monitoring System.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-CDI-5x00-x0S

    Effectively monitor compressed air systems with the CDI meter. This flow meter includes two probes, one warmer than the other. This arrangement calculates mass velocity based on heat requirements. Additionally, pipe area data is used to determine flow amounts. 

    Requires analog port selection during U30 system  or RX3000 configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a UX120-006M, ZW Series or U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-ASH-G2-x00

    The Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and only ±1.5% FS -40° to -20°C and 85° to 125°C (-40° to –4°F and 185° to 257°F).

    Requires analog port selection during U30 system or RX3000 configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a UX120-006M, ZW Series or U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-CON-ACT-xxx

    The AC Voltage transmitter is a self-powered transformer for monitoring sine wave, single-phase AC voltage. This sensor requires an Input Cable to connect to the UX120-006M, ZW series and U series of data loggers.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    CABLE-DCVOLT

    The DC Voltage input cable allows you to connect 3rd party sensors with a DC Voltage ouput to the UX120-006M, ZW Series or the U series of data loggers.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    TMCx-HD

    The TMC temperature probe can be used in air, soil & water work with the UX120-006M, ZW Series or U Series of data loggers. Temperature probes are available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
Page 1 / 12