HOBO data loggers for monitoring indoor, outdoor, and underwater environments.
Download the Catalog!
Hydrophobic Vent Tube Caps attach to the opening of the Stevens SDX Pressure Sensor vent tube. The caps have a hydrophobic membrane that allows barometric pressure compensation without allowing water ingress, while also not requiring replacement. Unlike desiccant cartridges, this cap does not “pull” moisture out of the tube. If there is moisture in the tube already, it will remain there with the use of this cap. It is recommended that each SDX vent tube is protected from water ingress with either this cap or a desiccant cartridge (T-SDX-93030-010).
Sensor port connector with 2 positions. Accepts one positive and one negative wire. Used to connect AC current transformers to one input position on an EG4100 device. Replacement component for EG4100 meters.
The Maintenance Kit includes the Calibration Kit (MX2500-CAL-KIT) and the Electrode Storage Solution (MX2500-STORE-SOLN).
The Electrode Storage Solution is used to properly store and condition the pH electrode that is used with the HOBO MX pH Logger. The purpose of the storage solution is to maintain the hydrated gel layer that is integral to accurate pH readings.
The pH 4.01, 7.00, and 10.00 Calibration Solutions (475 mL bottles) are used to calibrate the pH electrode in the HOBO MX pH Logger.
The Calibration Kit includes pH 4.01, pH 7.00, pH 10.00 buffer solutions (475 mL bottles), and the 4 oz. calibration beaker (MX2500-CAL-BKR).
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.