Attached is a screenshot from a data file recorded by a HOBO UX120-006M 4-Channel Logger that was connected to the Veris T-VER-PXU-L Differential Pressure Transducer configured in bi-directional pressure mode. The sensor was configured to output a 4-20mA signal that corresponded with a pressure range of -1 INWC to +1 INWC as measured by the transducer. The logger was scaled as 4mA = -1 INWC and 20mA = +1 INWC.

Other ranges are also supported with the T-VER-PXU-L.

Categories

Tech Note
Getting Started
Software