How to configure differential pressure for bidirectional scaling

Set the PXU sensor to Bidirectional mode by moving the jumper to BI, as described in the attached manual.

Once the jumper is set to Bidirectional you will need to launch the logger choosing the appropiate scale values based on your selection

When you launch from HOBOware, choose the adapter cable for the external channels.

 

Then choose the Scaling button to the right, and then Linear Scaling Assistant and Create new 

 

 

Then select Save and complete the launch process.

Wiring detail is also attached. 

AttachmentSize
PDF icon pxseries_i0c2.pdf594.88 KB
PDF icon T-VER-PX-2_5.pdf30.63 KB
Associated Products 
Hardware Training