Water Proof Shuttle for Beginners

This article will show you how to use the Water Proof Shuttle and a logger together.  We are shoeing a U22-001 logger for this demonstration but the same spet apply to any USB based optic logger.  These steps are nessisary for the first deployment of a logger and when communicating with the logger directly. 

Note that the shuttle has the Water temp Pro couple attached. See below

Insert the Logger tightly into the coupler.  You may need to tap the logger down with the palm of your hand to insure a proper connection.  See below

Insert the USB cable into the shuttle.  Make sure the USB cable is also plugged into the computer with Hoboware Pro installed.  See below

Squeeze the lever on the side of the coupler so that the end of the lever makes contact with the shuttle.  (No it will not break) See below

The "OK" LED light should glow and stay on.  At this point you will be able to communicate with your logger directly through the shuttle.  Referrer to the Hoboware users Guide for launching help. 

Happy Logging!