Remote Water Level Monitoring

The Challenge:
Real-time remote water level monitoring


The combination of the RX3000 (or U30-GSM) and a third-party water level sensor with an analog output provides a solution to remotely monitor water levels and access data via the internet. This system can also send notifications when critical water levels are reached. Typical applications include monitoring wells, groundwater, surface water, storm water and storm surges. For details on wiring and software configuration, please see the Remote Water Level Monitoring Application Note for RX3000. If you have a HOBO U30 that you will be using, please see this application note. This solution uses a vented water level sensor to get real-time level readings, without needing to use a separate sensor to do barometric pressure compensation. This allows alarm notifications to operate directly from the sensor readings. The water level sensor can be directly connected to the Analog Sensor Port of the U30 station.

 


Configure Solution

Part #/Name
 
 

RX3000
RX3000 Remote Monitoring Station
1 recommended

The appropriate base configuration should be: RX3003-00-01 (3G) with an SP-807 US Max-Connect Plan

RX3000

Starting at $899
Configure & Buy


RXMOD-A1
RX3000 4-channel Analog Module
1 recommended
RXMOD-A1
$120

SOLAR-3W
3 Watt Solar Panel
1 recommended
SOLAR-3W
$189


Other Onset Smart Sensors as Desired



Order parts listed below from Measurement Specialties

www.meas-spec.com,
1-800-678-7226

  • KPSI Series 700 Submersible Level Transducer - Starting at $435 plus vent cable
  • Vented Cable - $1.30 per ft
  • Desiccant Cartridge included