All Sensors

Results: 17 to 32 of 89
  • $35
    T-MAG-0400-20

    The small size 20 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $35
    T-MAG-0400-50

    The small size 50 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $35
    T-MAG-0400-05

    The small size 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $249
    T-WNB-3Y-208-P

    The WattNode sensor provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications.

    This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter, or a HOBO® Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $12
    CABLE-ADAP5

    The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $12
    CABLE-ADAP10

    The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • RMYOUNG-05108-45

    The Heavy Duty Wind Monitor HD-Alpine combines the features of the HD unit along with the ice resistant coating of our popular Alpine Wind Monitor, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. Robust, reliable, durable...all words to describe the latest addition of the Young family of wind monitors developed to endure the most extreme environments. The Wind Monitor-HD-Alpine utilizes extremely long wearing, oversize ceramic bearings to increase the service life many times longer than standard stainless steel bearings. In addition to being more wear resistant, ceramic bearings are resistant to corrosion in environments that are hostile to steel bearings.

 The Wind Monitor HD-Alpine also has an oversized propeller shaft, high pitch propeller and locking propeller nut, all features that will further enhance the long term reliability of the sensor.

 All external housing surfaces are coated with a specially formulated, ice resistant coating to improve performance in harsh Alpine conditions. The all-black color scheme further enhances the ice shedding performance of the sensor.

 The instrument mounts on standard 1 inch pipe.

    The Heavy Duty Wind Monitor HD-Alpine combines the features of the HD unit along with the ice resistant coating of our popular Alpine Wind Monitor. Robust, reliable, durable...all words to describe the latest addition of the Young family of wind monitors developed to endure the most extreme environments. The Wind Monitor-HD-Alpine utilizes extremely long wearing, oversize ceramic bearings to increase the service life many times longer than standard stainless steel bearings. In addition to being more wear resistant, ceramic bearings are resistant to corrosion in environments that are hostile to steel bearings.



    The Wind Monitor HD-Alpine also has an oversized propeller shaft, high pitch propeller and locking propeller nut, all features that will further enhance the long term reliability of the sensor.



    All external housing surfaces are coated with a specially formulated, ice resistant coating to improve performance in harsh Alpine conditions. The all-black color scheme further enhances the ice shedding performance of the sensor.

The instrument mounts on standard 1 inch pipe.

  • RMYOUNG-05106

    The Wind Monitor is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCC-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.

    The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. All materials are carefully selected for corrosion resistance and maximum durability in the harsh marine environment. Stainless steel bearings are used throughout. Special waterproof lubricant further enhances reliability. The instrument mounts on standard 1 inch pipe.

  • RMYOUNG-05108

    The Wind Monitor-HD is a high resolution wind sensor, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCC-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring. The Wind Monitor-HD has important features that greatly extend the service life of this popular sensor. It promises improved survivability for the most severe wind measuring applications. The reliability of the Wind Monitor sensor is well known. The sensitive vane and propeller combination has proven effective for countless applications in many disciplines. The Wind Monitor-HD (Heavy Duty) model is designed to address the most common concern of mechanical wind sensors: bearing replacement. The HD utilizes extremely long-wearing, oversize ceramic bearings to increase service life many times longer than standard stainless steel bearings. In addition to being more wear-resistant, ceramic is resistant to corrosion in environments that are hostile to steel bearings.


    The Wind Monitor-HD also has oversized propeller shaft, high pitch propeller and stainless steel locking propeller nut, all features that will enhance long-term reliability of the sensor.
The instrument mounts on standard 1 inch pipe.

  • RMYOUNG-05103

    The Wind Monitor is a high performance wind sensor that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCE-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.

    Rugged, corrosion-resistant construction makes the Wind Monitor ideal for a wide range of wind measuring applications.
The wind speed sensor is a four blade helicoid propeller; the wind direction sensor is a rugged yet lightweight vane. Vane angle is sensed by a precision potentiometer. Constructed of UV stabilized plastic with stainless steel and anodized aluminum fittings, the sensor mounts on standard one-inch pipe.

  • $39
    TMC6-HE

    A faster response version of our TMC6-HD complete with a plated copper sensor probe that can be mounted to a pipe or flat surface. The sensor is packaged with its own accessories for either strapping to a pipe or attaching to a flat surface.  For use with HOBO U-Series, UX120-006M external-channel data loggers or ZW series wireless datanodes.

    Parts Included:

    • Thermal grease is included for improved thermal conductivity. 
    • two tie wraps
    • a screw
    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $74
    S-UCD-M001

    The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open. See how the pulse recorder works.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $74
    S-UCC-M001

    The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second). See how the pulse recorder works.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $65
    T-MAG-SCT-600

    The Magnelab AC Current 600 Amp AC Current Transformer or CT (Magnelab part # SCT-2000-600) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is accurate current measurement for many types of equipment, including variable frequency drives and switched power sources. One or two CTs can be used with each FlexSmart TRMS Module.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $220
    T-VER-PXU-L

    The T-VER-PXU-L is a differential air pressure transducer that utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliability. The stability, accuracy, and ease-of-use characteristics of the PX models make them the ideal product for differential pressure monitoring applications.

    Requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • $3450
    T-ION-TVOC

    Dependably measure volatile organic compounds with the TVOC sensor. With the deployment of a fixed continuous monitor, users can avoid dangers by monitoring areas in question. A variety of industries use the TVOC to minimize poisoning and explosions. 

    Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger or ZW series data loggers, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare

Page 2 / 6