Air/Water/Soil Temp Sensor (1' cable) - TMC1-HD

A temperature sensor for use with HOBO U-Series external-channel data loggers or ZW series wireless datanodes. This model measures temperature in air, water, or soil. Accuracy and resolution vary according with attached logger model. Measurement range is -40° to 50°C (-40° to 122°F) in water or soil, -40° to 100°C (-40° to 212°F) in air; response time is minutes typical to 90% in air moving 1 m/sec (2.2 mph); response time in stirred water is 1 minute typical to 90%. This model sensor is attached to a 0.3m (1 ft) cable.

Range:

Accuracy with H8 (insert probe 0.9 in. min.): ±0.5° at 20°C (±0.9° at 68°F), see plot A

Accuracy with U12 series (insert probe 0.9 in. min.): +/- 0.21°C from 0° to 50°C (0.38°F from 32° to 122°F), see plot B

Accuracy with ZW series(insert probe 0.9 in. min.): +/- 0.21°C from 0° to 50°C (0.38°F from 32° to 122°F), see plot B

Resolution with H8: 0.41° at 20°C (0.7°F at 68°F), see plot A

Resolution with U12: 0.03° at 20°C (0.05°F at 68°F), see plot B

Response time:
< 3 minutes typical to 90% in 1 m/sec air flow/< 30 seconds typical to 90% in stirred water

Housing: Stainless-steel sensor tip

Probe dimensions: 0.5 cm x 2.5 cm (0.20 in. x 1.0 in.)

Length: Available in 0.3m, 1.8m, 6.1m, and 15.2m foot cable lengths (1, 6, 20, and 50 foot)

Weight: 14g (0.5 oz), 37g (1.3 oz), 125g (4.4 oz), or 280g (9.9 oz)

Note: Sensor tip and cable immersion in fresh water up to 50°C (122°F) for one year; radiation shield strongly recommended for use in sunlight.

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.