Product Image Viewer
˂
  • S-VIA-CM14
˃

12-bit Voltage Input Adapter Sensor

Part # S-VIA-CM14
 
Outdoor use requires sensor to be within a weatherproof enclosure.
 

Overview

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.

Highlighted Features

  • 12-bit resolution
  • Digital filtering improves measurement accuracy with 32 readings/sample—4-20 mA adapter has 60 Hz noise rejection
  • Measurement averaging over logging interval further enhances accuracy
  • Plug-in modular connector for easy interface with HOBO® Weather Station or HOBO® Micro Station data loggers
  • Screw terminal for connecting to sensors
  • Micro Station has room for two adapters and Weather Station has room for ten (adapters mount inside station enclosure)
  • Represents one data input channel

In what environment does this sensor operate?

This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?

The S-VIA-CM14 sensor supports the following measurement: DC Voltage

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.

Highlighted Features

  • 12-bit resolution
  • Digital filtering improves measurement accuracy with 32 readings/sample—4-20 mA adapter has 60 Hz noise rejection
  • Measurement averaging over logging interval further enhances accuracy
  • Plug-in modular connector for easy interface with HOBO® Weather Station or HOBO® Micro Station data loggers
  • Screw terminal for connecting to sensors
  • Micro Station has room for two adapters and Weather Station has room for ten (adapters mount inside station enclosure)
  • Represents one data input channel

In what environment does this sensor operate?

This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?

The S-VIA-CM14 sensor supports the following measurement: DC Voltage

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement range: 0-5 V DC
Accuracy: ±10mV ±0.3% of reading (over operating temperature range)
Resolution: ±1.221 millivolts
Input impedance: 1 Megohms
Sensor trigger open collector: Maximum sink current: 115 mA; 30V maximum
Sensor trigger source: Voltage: 2.5 V ±2.4%; maximum current: 1 mA
 
Trigger Timing
Warm-up time: 10.3 ms ±3% (fixed)
Measurement time: 2.4 ms ±3%
 
Cable length: 14 cm (5.5 inch)
Ground connection: Same for adapters and PC interface
Documentation for the S-VIA-CM14

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Customers Also Bought

CASE-PELICAN-1510

The largest, most durable airline-legal carry-on available, the new 1510 Pelican case provides safe and convenient transport of your HOBO data logging equipment. This watertight, crush-proof, and dust-proof case features a sturdy but lightweight design that includes a Pick N Pluck™ foam interior, 17” retracting extension handle, strong polyurethane wheels, stainless steel hardware, padlock protectors, and a lifetime guarantee of excellence.

Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed