0 - 600 Amp Split-core AC Current Sensor - CTV-E
A split-core AC current sensor responsive over the range of 0 to 600 amps AC for use with U12 data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.
This sensor is not designed for use with intrinsically-safe (IS) loggers; the molded-plastic housing is rated for indoor use per UL508, with removable leg.
- UL listed
- Sensor power induced from line voltage
- Self-gripping split-core design for fast installation
The CTV-E Sensor is for use in Indoor environments
The CTV-E Sensor supports the following measurements:
|Onset # CTV-E|
- Ranges available (AC Amps): 0-20, 0-50, 0-100, 0-200, 0-600
- Accuracy with H8: ±5.0% of full scale
- Accuracy with U12: ±4.5% of full scale
- Response time (from 10% to 90% of amplitude): see table
- Input current: AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag
- Voltage rating: 600 VAC
- Construction and operating environment: Molded plastic housing for indoor use per UL508; pivoting leg (leg on CTV-D and CTV-E units is fully removable); UL listed.
- Cable Length: 1.8m cable (6 foot)
- Dimensions: see table
- AC current sensors are not designed for use with Intrinsically Safe (IS) loggers
|Part No.||Range (Amps AC)||Approximate Response Time (milliseconds)||Dimensions|
|Window||Outer Length||Outer Width||Height|
|CTV-A||0–20||440||2.8 cm x 2.3 cm 1.1 in. x 0.9 in.||7.4 cm 2.9 in||6.6 cm 2.6 in||2.5 cm 1.0 in|
|CTV-B||0–50||200||2.8 cm x 2.3 cm 1.1 in. x 0.9 in||7.4 cm 2.9 in||6.6 cm 2.6 in||2.5 cm 1.0 in|
|CTV-C||0–100||100||2.8 cm x 2.3 cm 1.1 in. x 0.9 in||7.4 cm 2.9 in||6.6 cm 2.6 in||2.5 cm 1.0 in|
|CTV-D||0–200||450||3.8 cm x 3.3 cm 1.5 in. x 1.3 in||9.9 cm 3.9 in||11.9 cm 4.7 in||2.8 cm 1.1 in|
|CTV-E||0–600||490||7.4 cm x 6.4 cm 2.9 in. x 2.5 in||13.5 cm 5.3 in||15.0 cm 5.9 in||2.8 cm 1.1 in|
Standalone Data Loggers - optional external sensors
Temperature/Relative Humidity/2 External Channel
Standalone Data Loggers - requires external sensor
Documentation for the CTV-E
The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.