All Sensors

Results: 17 to 32 of 93
  • T-ACT-0750-100

    The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-ACT-0750-050

    The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-ACT-0750-250

    The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-ACT-0750-020

    The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • S-WDA-M003

    The Wind Direction Smart Sensor is a research-grade plug-and-play sensor for measuring and logging wind data. It provides average wind direction for the measurement interval. This highly-durable wind vane has a drip overhang for anti-icing. Its shielded stainless-steel ball bearings and static-dissipating housing provide a long sensor life. The sensor calculates a unit vector average of the wind direction, providing data directly in degrees.

    NOTE: an M-CAA Full Cross Arm or M-CAB Half Cross Arm is required for mounting.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-VER-E50B2

    Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22, and H21 data loggers.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • S-SMD-M005

    Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with soil-specific calibration. The 10cm probes measure soil moisture over a larger volume of soil which helps to average out any soil variability. Readings are provided directly in volumetric water content. This sensor's high frequency design gives it a low sensitivity to salinity and textural effects and a wide measurement range.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-MAG-0400-50

    The small size 50 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-MAG-0400-75

    The small size 75 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-MAG-0400-20

    The small size 20 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a 0 to .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-MAG-0400-05

    The small size 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with Onset data loggers via the FlexSmart TRMS module and with kWh transducers (WattNodes) for True RMS measurement of sinusoidal and non-sinusoidal waveforms. The result is an accurate current measurement for many types of electrical equipment.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-WNB-3Y-208-P

    The WattNode sensor provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications.

    This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter, or a HOBO® Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • CABLE-ADAP10

    The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • CABLE-ADAP5

    The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • RMYOUNG-05106

    The Wind Monitor is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCC-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.

    The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. All materials are carefully selected for corrosion resistance and maximum durability in the harsh marine environment. Extremely durable ceramic bearings are used throughout. Stainless steel bearings are used throughout. Special waterproof lubricant further enhances reliability. The instrument mounts on standard 1 inch pipe.

  • RMYOUNG-05103

    The Wind Monitor is a high performance wind sensor that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCE-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.

    Rugged, corrosion-resistant construction makes the Wind Monitor ideal for a wide range of wind measuring applications.
The wind speed sensor is a four blade helicoid propeller; the wind direction sensor is a rugged yet lightweight vane. Vane angle is sensed by a precision potentiometer. Constructed of UV stabilized plastic with stainless steel and anodized aluminum fittings, the sensor mounts on standard one-inch pipe.


Page 2 / 6