All Sensors

Results: 1 to 16 of 93
  • S-WCG-M003

    The Ultrasonic Wind Speed and Direction Smart Sensor is compact and rugged with no moving parts. Because this sensor is ultrasonic it is able to measure very low wind speeds, down to 0.4 m/s (compared to 1.0 m/s for our mechanical sensors). As with all Onset smart sensors, this sensor is plug-and-play with HOBO stations (RX3000, USB Micro Station and the U30-NRC). Because it is automatically recognized by HOBO stations, there is no need for programming, resulting in fast and easy deployment. The sensor is powered by its own built-in solar panel.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-VER-PX3UL

    The T-VER-PX3UL transducer can measure either air pressure or velocity with the flip of a switch. The PX3 is available in three installation configurations: duct, panel or universal. Duct and panel models have two pressure and velocity range options: 0-1" WC / 0-3,000 ft/min or 0-10" WC / 0-7,000 ft/min with seven field-selectable sub-ranges for pressure and eight for velocity. All variants are available with and without display. The PX3 has an IP65/NEMA 4 environmental rating.

    Requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-EG-x000-2775

    Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.

    Technical Specifications

    • 333 mVrms at rated output
    • Accurate within 1% from 30A to stated current rating
    • 6' twisted pair lead with CT connector
    • Note: 30A minimum current required at all times. No external integrator required
    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-EG-xxxx-xxxx

    Split-core CTs from J&D Sensing offer a well constructed hinged body and are accurate to +/-1% from 1%-100% of their stated current rating. The small interval for physical size options (10mm/0.39", 24mm/0.94", and 36mm/1.42") allow for a flexible installation. Each CT size has a hinge and clipping mechanism, making it easy to close the CT in tight situations.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-DCI-F300-1x3

    The F300 series is a versatile and rugged, high-performance air velocity and air temperature sensor. Designed with conformal coated electronics and sealed enclosure, the F300 is suitable for demanding applications, including those in corrosive or alkaline environments. With its robust, splash proof design, and UV tolerant construction, the F300 is designed to handle a wide range of product and process control air flow applications.

    The sensor requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-DCI-F350-W5x3

    The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as products involving high EMI sensitivity or extreme temperature, or those where the sensing area is too small for typical probe-style sensors.

    The sensor requires analog input option during RX3000 or U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-SDX-93720-xxx-xxx

    The Stevens SDX (Submersible Depth Transmitter) is a high-accuracy water level/depth sensor that works with Onset’s HOBO® RX3000 cellular weather station to bring your water level data to the web. Suitable for a wide range of level monitoring applications, the SDX is a cost-effective option for remote, real-time water level data collection.

  • S-RGE-M002

    Davis® Rain Gauge Smart Sensors are compatible with all HOBO weather station loggers, HOBOware, and HOBOlink. They offer the same ease-of-use as existing Onset Smart Sensors, providing cost-effective HOBO weather stations for projects on a tight budget. The sensors feature a plug-in modular connector for easy installation, and all configuration parameters are stored in the sensor and automatically communicated to the logger, eliminating the need for programming or extensive setup.

    • Designed to meet World Meteorological Organization (WMO) guidelines
    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • S-RGF-M002

    The Davis® Rain Gauge Smart Sensors features the new AeroCone® design, for better measurement accuracy in high-wind conditions. This gauge is made from UV-stabilized ABS plastic to provide a cost-effective sensor for rainfall measurement, and is plug-and-play compatible with all HOBO weather stations.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • pHionics

    The pHionics STs pH sensor is a submersible, water quality transmitter featuring an integrated preamp and an isolated 'true 2-wire', 4-20 ma transmitter. Compatible with Onset HOBO RX3000 weather stations, the STs pH sensor provides independent channels to simultaneously transmit a pH and temperature signal -- two wires for pH and two wires for temperature. The compact design makes the rugged sensor/transmitter ideal for applications such as process control, data acquisition, wastewater treatment, and groundwater monitoring.

  • RMYOUNG-05305

    The Wind Monitor is a high resolution wind sensor for air quality applications, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCB-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.  It combines low threshold, fast response and excellent fidelity to meet important regulatory standards.



    U.S. Environmental Protection Agency Ambient Monitoring Guidelines for Prevention of Significant Deterioration (PSD).



    U.S. Nuclear Regulatory Agency NRC Regulatory Guide 1.23 Meteorological Programs in Support of Nuclear Power Plants.



    American Nuclear Society Standard for Determining Meteorological Information at Power Plants.



    Wind speed is sensed by a lightweight, carbon fiber thermoplastic (CFT), helicoid propeller. The wind direction sensor is a lightweight, balanced vane. The instrument body is UV stabilized plastic with stainless steel and anodized aluminum fittings. The instrument mounts on standard 1 inch pipe.

  • S-WCF-M003

    Davis® Wind Speed/Direction Smart Sensors are compatible with all HOBO weather station loggers, HOBOware, and HOBOlink. They offer the same ease-of-use as existing Onset Smart Sensors, providing cost-effective HOBO weather stations for projects on a tight budget.  The sensors feature a plug-in modular connector for easy installation, and all configuration parameters are stored in the sensor and automatically communicated to the logger, eliminating the need for programming or extensive setup.

    • Designed to meet World Meteorological Organization (WMO) guidelines
    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • S-WSB-M003

    Measure wind speed from 0 to 76 m/s (0 to 170 mph). This smart sensor provides data reporting average wind speed and highest 3 second gust for each logging interval. The starting threshold is 1 m/s (2.2 mph); sensor survives through 170 mph. This model comes with a 3m cable.

    NOTE: an M-CAA Full Cross Arm or a M-CAB Half Cross Arm is required for mounting.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • S-WSET-B

    The Wind Sensor Set includes Onset's research-grade plug-and-play Wind Speed Smart Sensor and the Wind Direction Smart Sensor. This combination provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval. These durable sensors will provide many years of accurate and reliable performance.

    NOTE: Mount these on the M-CAA Full Cross Arm for proper sensor spacing for accurate wind measurement in all wind directions.

    The cross arm must be mounted on a stable mast using guy wires as needed to prevent the sensors from vibrating in high winds.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • T-MINOL-130-NL

    Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for use with 3/4" pipes. (Use step-ups or step-downs to deploy the T-MINOL with 1/2" or 1" pipe diameters.)

    Add to Cart
    Add to Quote
    Compare Product

    Compare
  • CABLE-ADAP24

    The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).

    Add to Cart
    Add to Quote
    Compare Product

    Compare

Page 1 / 6