HOBO U9 Motor On/Off Data Logger - U9-004

Qty.	1-9	10-99	100+
$US	$85	$79	$72

2 to 4 week lead time

Printable Data Sheet

View all time-of-use data loggers

This product's recommended upgrade:
UX90-001 - Compare

Overview
Required Items
Parts & Accessories

Overview

Description & Features

Detailed Specifications

Documentation

FAQs

Resources

The HOBO U9 Motor On/Off Data Logger records motor on and off status making it ideal for energy audits and equipment monitoring. The data logger monitors the AC field generated by the motor and is easily mounted on the motor housing.

Features:

Internal AC magnetic field sensor monitors motor on and off conditions
Records up to 43,000 state changes
Includes mounting kit with magnet, hook and loop tape, 3/8" double-sided tape

Environment:

The U9-004 Data Logger is for use in Indoor environments

Measurements:

The U9-004 Data Logger supports the following measurements : Motor On/Off

AC field threshold: 750mGauss at 60Hz

Time accuracy: Approximately ± 1 minute per month at 25°C (77°F)

Operating temperature:
Logging: -20° to 70°C (-4° to 158°F)
Launch/readout: 0° to 50°C (32° to 122°F), per USB specification

Humidity range: 0 to 95% RH, non-condensing

Battery life: 1 year typical use

Memory 64K bytes (up to 43,000 state changes)

Weight: 29 g (1.0 oz)

Dimensions: 45 x 60 x 20 mm (1.8 x 2.38 x 0.77 inches)

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).

U9-004

9622_B_MAN_U9_004

PDF

What should I do if the data logger's internal board gets wet?

[show/hide]

If possible, remove the board from the case and the battery from the board. Dry the board completely using a hair dryer.

View Full FAQ
I just bought a Data Logger. When I first plugged them into the USB port, a popup menu for Digital Signature concerning Microsoft asked if I wanted to continue: YES or NO. I said YES to all but one of them and now the computer won't recognize the logger.

[show/hide]

Open HOBOWare, plug the logger back in, then click on Start->Settings->Control Panel->System.

View Full FAQ
Can the data be retrieved from a logger that is not communicating, or a logger that was accidentally re-launched prior to the data being downloaded?

[show/hide]

There are two common reasons for data loss: Relaunching a logger before the data has been saved Technical problem with the logger itself.

View Full FAQ
I launched my data logger with "delayed start," but I noticed that logging began earlier than the time I entered. What happened?

[show/hide]

There is a small bug in early versions of the HOBO Water Temperature Pro data loggers that result in premature starting in some cases (when using the...

View Full FAQ
I cannot communicate with my data logger.

[show/hide]

The Optic and Tidbit data loggers must be inserted into the Base Station in order for the computer to detect them; it will not detect the Base...

View Full FAQ
My battery level seems to be going down quickly, what could be causing this?

[show/hide]

Check both the logging and the sampling interval to make sure they are greater than one-minute intervals.

View Full FAQ
The datafile shows two more points than my testing did. Why?

[show/hide]

The first and last event on your datafile is a stamp of the start and end time.

View Full FAQ
What is the maximum recommended source impedance?

[show/hide]

The maximum recommended impedance for analog sources is 2.5 K. This value is calculated based on the maximum leakage current of the input pin.

View Full FAQ
Can the data loggers be exposed to any type of chemical or chemical vapors?

[show/hide]

As a general rule, no.

View Full FAQ
How often do the data loggers need recalibration and/or servicing?

[show/hide]

The CO data logger should be checked, at a minimum, on a yearly basis. Proper testing requires a CO testing chamber.

View Full FAQ
Why is my connection to the data loggers intermittent?

[show/hide]

For best performance, connect the USB cable directly to a port on your computer.

View Full FAQ
What happens if my Keyspan USB server has a power interruption?

[show/hide]

If your Keyspan USB server has its power interrupted while you are running an alarm configuration, HOBOware will lose its connection to the data...

View Full FAQ
How do I turn the data logger off?

[show/hide]

HOBO/StowAway data loggers shut off when the memory is full (unless wrap around is selected), or the data is downloaded to a computer.

View Full FAQ
My data logger only recorded one data point, stops recording immediately after launch, or stopped recording prematurely.

[show/hide]

There are many situations that can cause a data logger to stop recording: 1.

View Full FAQ
I cannot communicate with my HOBO Shuttle!

[show/hide]

Check to make sure that the batteries are still good. Follow the directions below for the model you have.

View Full FAQ
How do I turn the data logger off?

[show/hide]

All HOBO and StowAway data loggers shut off when the memory is full (unless wrap around is selected), or the data is downloaded to a computer.

View Full FAQ
What data loggers are supported by Real-Time Alarm Software?

[show/hide]

All U10 and U12 data loggers are fully compatible with the Real-Time Alarm Software.

View Full FAQ
The batteries in my data logger died while in use. Did I lose all of my data?

[show/hide]

No. The data is stored on non-volatile EEPROM. For data loggers with external batteries: change batteries and offload data, then relaunch normally.

View Full FAQ
Do I need to rename the data file on the logging PC?

[show/hide]

You do not need to periodically rename or delete the data file on the logging PC because the file is automatically updated (e.g., test_1.txt, .

View Full FAQ
How does HOBOware behave when a data logger has a low battery?

[show/hide]

When device battery power is very low interaction with HOBOware can be intermittent. .

View Full FAQ
The data logger is shutting off prematurely.

[show/hide]

A discharge of static electricity may cause a running data logger to stop recording.

View Full FAQ
What does the CE stamp on the data logger mean?

[show/hide]

The CE mark identifies the product as complying with relevant directives in the European Union (EU). .

View Full FAQ
I just placed a new battery in my data logger and it still will not connect.

[show/hide]

The TL-5186 lithium batteries build up an internal passive resistance over a period of non-use.

View Full FAQ
What data loggers are supported by Real-Time Alarm Software?

[show/hide]

All U10 and U12 data loggers are fully compatible with the Real-Time Alarm Software.

View Full FAQ
What is a Data Logger?

[show/hide]

A data logger (or datalogger), commonly referred to as a 'HOBO', is an electronic instrument that records measurements (temperature, relative...

View Full FAQ
How do I protect my data loggers from electrical discharge (ESD)?

[show/hide]

A discharge of static electricity may cause a running data logger to stop recording.

View Full FAQ

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below.

Additional Related Content: