Product Image Viewer
˂
  • U11-001
˃

HOBO 3 State/1 Event Data Logger

Part # U11-001
 
This product is discontinued.
 

Other Products in this Series

Overview

The HOBO U11 3-State/1-Event Data Logger lets you simultaneously monitor and log state changes in up to three locations plus one time/date-stamped event. The three state and one event channels monitor contact closures or openings driven by external sensors mounted on motors, doors, or other cycling equipment.

Highlighted Features

  • External sensor cable included (CABLE-2.5-STEREO)
  • Optional AC Current Switch (CSV-A8) to measure Motor on/off
  • Records up to 43,000 state changes or events
  • Four input cables
  • Includes mounting kit with magnet, hook and loop tape, tie-wrap mount, tie wrap, and two screws

In what environment does this data logger operate?

This data logger operates in an indoor environment.

What measurements does this data logger support?

The U11-001 data logger supports the following measurements: Event, Motor On/Off and State Open/Closed

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

State and Event Channels: External contact input: Passive relay switch or contact closure - minimum duration 1 second (open > 300 KΩ or closed < 10 KΩ)

U11 Timebase Error Plot Max total cable run: 32 m (105 ft); if using only state channels, 64 m (210 ft)

Time accuracy: Approximately ± 1 minute per month at 25°C (77°F), see Plot A

Operating temperature:
Logging: -20° to 70°C (-4° to 158°F)
Launch/readout: 0° to 50°C (32° to 122°F), per USB specification

Humidity range: 0 to 95% RH, non-condensing

Battery life: 1 year typical use with normally open contacts; two months if all four channels are logging with continuously closed contacts

Memory: 64K bytes (up to 43,000 state changes or events)

Weight: 50 g (1.8 oz)

Dimensions: 58 x 74 x 22 mm (2.3 x 2.9 x 0.9 inches)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

Documentation for the U11-001

Customers Also Bought

CSV-A8

Measure runtime (time-of-use) of equipment with the CSV-A8 split-core AC current sensor along with a compatible HOBO data logger. This UL-listed sensor has built-in on/off status lights and provides an adjustable current threshold of 0.5 to 175 amps. Simply install the sensor around a current-carrying wire to the equipment to be monitored and then connect the sensor to a compatible UX90 or UX120 data logger. 

Add to Cart
Add to Quote
Compare Product

Compare
T-WNB-3D-240

The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports a 3-phase Delta-connection of 208/240 VAC.

Add to Cart
Add to Quote
Compare Product

Compare
UX120-017

The HOBO UX120 Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building commissioners – to easily track building energy consumption, equipment runtimes, and water and gas flow rates. The HOBO UX120 Pulse Data Logger is available in a standard memory model (UX120-017) capable of 500,000 measurements and an expanded memory version (UX120-017M) capable of over 4,000,000 measurements.

Add to Cart
Add to Quote
Compare Product

Compare
UX90-001

The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This data logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Data Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.

Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed