Product Image Viewer
˂
  • TBI32-05+37
˃

StowAway TidbiT Temperature Data Logger

Part # TBI32-05+37
 
-5° to 37°C Temperature (1,000 ft.)
This product is discontinued.
 

Upgrade to UTBI-001
Other Products in this Series

Overview

This tiny completely sealed underwater temperature data logger utilizes optic communications for launch and readout. This model records 32K of temperature measurements from -5°C to 37°C (24 °F to 99°F). Waterproof to 333m (1000ft), StowAway TidbiT units should not be used in wet (>90% RH) environments and water temperatures higher than +30°C for more than eight weeks cumulatively.

Highlighted Features

  • Waterproof to 1000 feet
  • Completely sealed in epoxy; very durable
  • User-selectable sampling interval: 0.5 seconds to 9 hours, recording times up to several years
  • Blinking LED light shows if temperature goes out of user-determined limits
  • Precision components eliminate the need for user calibration
  • Programmable start time/date
  • Triggered start with coupler or magnet
  • Memory modes stop when full or wrap-around when full
  • Nonvolatile EEPROM memory retains data even if battery fails
  • Multiple sampling with minimum, maximum or averaging
  • Blinking LED light confirms operation
  • Time accuracy: ±1 minute per week at +68°F (+20°C)
  • Mounting tab
  • Compliance certificate available
  • NIST-traceable temperature accuracy certification available
  • 5 year non-replaceable battery (typical use :16 three-month deployments in water (+35°F to +80°F) with 4 minute or longer intervals (no multiple sampling), 1 offload per deployment.)

In what environment does this data logger operate?

This data logger operates in an underwater environment.

What measurements does this data logger support?

The TBI32-05+37 data logger supports the following measurement: Temperature

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Time Accuracy Time accuracy: approx. ±1 minute per week,
full dependance shown in Plot A

Depth: Rated to 1000 feet

Range†: -04° to 37°C (24° to 99°F)

Accuracy: ±0.2° at 20°C (±0.4° at 70°F)

Resolution: 0.16° at 20°C (0.29° at 70°F)

Capacity: 32,520 measurements

Operating temperature range: -20° to 50°C

Battery line typical use: 5 years

Size: 1.2 x 1.6 x 0.45"

Weight: 0.5 oz

†Specified range is narrower than nominal range due to precision calibration process. Using TidbiT Temp loggers in wet environments (>90% RH) over 86°F (30°C) for extended periods of more than 8 weeks cumulative may lead to premature failure. For applications over 30°C use the HOBO® Water Temp Pro v2.

Documentation for the TBI32-05+37

The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!

Customers Also Bought

U20L-01

The HOBO U20L-01 is a low-cost, research-grade water level data logger for continuously measuring water level and temperature in a wide range of underwater environments. It features 0.1% measurement accuracy, a polypropylene housing for use in both fresh and salt water, and a non-vented design for convenient and hassle-free deployment.

Helpful Links:
Barometric Pressure Compensation Assistant Demo
Multi-rate Sampling Demo

Add to Cart
Add to Quote
Compare Product

Compare
U22-001

Optical Interface for data transferThe HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible  to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

Add to Cart
Add to Quote
Compare Product

Compare
UA-001-64

A miniature, waterproof one-channel temperature data logger, this model is value-priced for short-term shipping applications or long-term deployment. Data logger alarm LEDs flash if temperatures have exceeded user-set levels and delay options, and provide visible verification that temperatures have been within the desired range throughout deployment. This 64K model stores approximately 52K of 10-bit temperature readings. For accurate temperature measurement in sunlight a solar radiation shield is required (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).

Optical Interface for data transfer

Add to Cart
Add to Quote
Compare Product

Compare
UTBI-001

Optical Interface for data transferOnly 3x4 cm, this tiny data logger measures temperatures over a wide temperature range. The TidbiT v2 provides 12-bit resolution and has ±0.2 °C accuracy. It is designed for outdoor and underwater environments and is waterproof to 300 m (1000 ft). An optical USB interface allows users to offload data in seconds. Please note, a solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

Add to Cart
Add to Quote
Compare Product

Compare

Recently Viewed