Onset

 Subscribe

 
SOFTWARE UPDATES INTERNATIONAL DEALER LOCATOR CAREERS
flag English
     

H06-001-02

HOBO® State Data Logger
 
Quantity
1-9
10-99
100+
$US
$95
$88
$81

Note: A complete system requires a logger, software, and communications. Sold Separately.


Overview

Monitors when doors are open/closed using an internal magnetic reed switch and external magnet. External input cable included to monitor contact closures of remote devices or presence of positive DC voltage.

divider
Features:
  • Time resolution: 0.5 second
  • Time accuracy: ±1 minute per week at +20°C (+68°F)
  • Programmable start time/date
  • Battery check at launch
  • Blinking LED lights show current state
  • Memory modes: stop when full, wrap-around when full
  • Full logger downloads in just 90 seconds
  • Nonvolatile EEPROM memory retains data even if battery fails
  • User-replaceable battery lasts one year
  • Mounting kit included (hook/loop, magnet, and tape)
  • Drop-proof to 5 feet
  • One-year warranty
divider
Environment: Indoor
Measurement: State Open/Closed
   
 
Product ID: H06-001-02
Product Name: State
Product Type: Data Loggers

Specs

HOBO State Time Base Error PlotMinimum state duration: 1/2 second

Time Accuracy: ±100 ppm at 20°C,
full dependence shown in Plot A

Capacity: 2,000 state changes (requires 8K of memory in HOBO Shuttle to fully offload)

External contact input: relay switch or contact closure

Length of included external contact cable: 6'

Operating temperature: -20°C to +70°C (-4°F to +158°F)

Relative humidity range: 0 to 95%, non-condensing

Size/weight: 2.375" x 1.875" x 0.75"/approximately 1 oz.

Battery: CR-2032 (lithium); provides one year of continuous use

Storage temperature: -40°C to +75°C (-40°F to +167°F)

Required Items

1 Compatible Sensors

  External sensors are not needed for this product.

2 Communications

  Measurement Part #/Name
Communications for the H06-001-02 
CABLE-USB232
USB Serial Adapter
Qty
1-9
10-99
100+
$US
$45
$42
$38
 
H09-003-08
HOBO Shuttle data transporter
Qty
1-9
10-99
100+
$US
$179
$166
$152
 
Required Communications for the H06-001-02 
CABLE-PC-3.5
Interface Cable for PCs
Qty
1-9
10-99
100+
$US
$9
$8
$7
 

3 Software

 Part #/Name Photo Pricing Buy   
Required Software for the H06-001-02 
BCXXXXXXX ->
   
 Part #/Name Photo Pricing Buy   
BCP4.3-ON
BoxCar® Pro 4.3 Starter Kit
No Image
Qty
1-9
10-99
100+
$US
$110
$102
$93
 
BC3.7
BoxCar 3.7
No Image
Qty
1-9
10-99
100+
$US
$39
$36
$33
 

CLOSE   
 
   

Accessories

Accessories for the H06-001-02 
COMPLIANCE CERT
No Image
Qty
1-9
10-99
100+
$US
$19
$19
$19
 
HRB-TEMP
Replacement batteries for several loggers (Box of 6)
Qty
1-9
10-99
100+
$US
$14
$13
$12
 

Support

Manual

Part Number Image Name Manuals
H06-001-02 F State Manual PDF

Maintenance

  No maintenance items for this product

FAQs

When I go into the launch screen the description field is full of DDDDDDs. [show/hide]

If a logger is disconnected immediately after selecting launch (or start), the information that is stored on the logger's
header may become corrupted. To correct the problem, simply relaunch the logger. Allow the launch parameters to be sent to the
logger before disconnecting the logger from the interface cable. Allow the logger to record a few measurements. Download the information from the logger to see if the DDDDDDs
in the Description field were overwritten. If the DDDDDs remain in the Description field, the logger will need to be returned to the place of purchase for repair.

What is the H06-001-02 State logger used for? How do you hook it up? [show/hide]

The HOBO State logger is used to monitor open/closed contact closures. A CABLE-2.5-STEREO cable is included with the state logger and can be used to connect to a passive contact closure or dry relay switch. The logger also has an internal reed switch that (when used with the included security magnets) can log the open and closing of doors, drawers, etc.

What is the difference between the HOBO Event logger and the HOBO State logger? [show/hide]

The HOBO Event logger records the opening of the contacts only. It does not record the closing. The HOBO State logger records changes in the state - both the opening and closing of the switch, (door open/close, light on/off, etc).