Part Number - U-DT-2
HOBO® U30 Shuttle
Discontinued
Important Information
HOBOware Pro is required for this product.
Overview
The HOBO U-DT-2 U30 Shuttle Data Transporter provides convenient in-field data offload and relaunch of HOBO U30-NRC systems and HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems (H22). The U30 Shuttle's 2 x 16-character display shows current readings (for selected data loggers), and logger status.
NOTE: HOBOware Pro software required.
Features
- Reads out data from systems in the field for transfer to a host computer
- Optionally relaunches the data logger — synchronizes the logger’s clock with the shuttle’s clock and (in most cases) sets logging to begin at the next interval
- Preserves data in nonvolatile memory, even if batteries are depleted
- Displays logger status, including memory, battery level, and sensor readings
- Displays its own status, including clock, memory, and battery level
- Lets you change the batteries in the field without resetting the clock
- Allows you to test individual smart sensors
Specifications
Requirements:
USB cable (provided); compatible logger with appropriate cable and/or base station
U-DT-2: HOBOware 2.6 or greater
Compatibility: HOBO U30 series systems, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer Speed
USB: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware User’s Guide for details) or changing logger batteries (10 minutes)
Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time
Batteries
Main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery Life
Main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).
Compatible items
USB Data Loggers - requires external sensor(s)
USB Data Loggers - w/external sensor(s)
Software
Replacement Parts
Customers Also Bought
Pelican Case
HOBO USB Micro Station Data Logger
HOBO U30 USB Weather Station
