All Products

All Products

HOBO data loggers for monitoring indoor, outdoor, and underwater environments.



Download the Catalog!
    ZW-008

    The HOBO® ZW-008 is a 4-channel wireless data node featuring two analog ports and two pulse input ports. It wirelessly transmits data in real time, reducing the costs and inconvenience associated with manual data offload.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    ZW-005

    The HOBO® ZW-005 is an easy-to-deploy, 4-channel wireless temperature/relative humidity data node. It includes an external 2m temperature/relative humidity sensor probe, and features one analog port, and one pulse input port. It wirelessly transmits data in real time, reducing the costs and inconvenience associated with manual data offload. 

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    U30-NRC

    This rugged weather station is Onset’s most durable outdoor environmental monitoring solution. Users can easily configure the HOBO U30-NRC Weather Station to fit their application needs. Use up to 15 channels to collect environmental data and then upload to HOBOware® software for analysis. HOBOware Pro is recommended for extended features, see the comparison here. The U30-NRC has four configurable systems, that can be configured below, that consist of the following part numbers: U30-NRC-000-05-S100-000, U30-NRC-000-10-S100-000, U30-NRC-VIA-05-S100-000, and U30-NRC-VIA-10-S100-000.

    T-VER-E50B2

    Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22, and H21 data loggers.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-WNB-3Y-208-P

    The WattNode sensor provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications.

    This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter, or a HOBO® Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-WNB-3D-240

    The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports a 3-phase Delta-connection of 208/240 VAC.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-WNB-3D-480

    The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta or Wye-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports a 3-phase Delta-connection of 480 VAC.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
    T-VER-8051-300

    The Veris AC Kilowatt Transducer incorporates one split-core AC current sensor and two voltage leads and outputs a signal proportional to kilowatts of power (consumption). Accepting an input primary voltage of 208 to 480 Volts AC rms, this transducer requires a Pulse Input Adapter. Because these sensors tie directly into the line, they should be used only by qualified personnel. NOTE: Not recommended for use with variable frequency drives.

    Add to Cart
    Add to Quote
    Compare Product

    Compare
Page 2 / 3